Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

how to simulate a failure on EVA to verify that the IRS works

daedro
Frequent Advisor

how to simulate a failure on EVA to verify that the IRS works

Hi everyone,

 

Somebody knows how to simulate a failure on EVA P6500 to verify that the IRS is working, i mean, without provoke a hardware failure like taking off one cable or something like that, if there is a way to do it from the command view.

 

thank you in advance

 


1 REPLY
Torsten.
Acclaimed Contributor

Re: how to simulate a failure on EVA to verify that the IRS works

With CV 10.0 just go to "system options" and click on "Perform remote service test"


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!