Disk Enclosures
1748151 Members
3570 Online
108758 Solutions
New Discussion юеВ

Re: hp 12h autoraid

 
tejas pandya_1
Occasional Advisor

hp 12h autoraid

hi
i have 12h autoraid i facing one problem after changing the raid controller module.on the LCD display i am getting error message NO ADDRESS TABLE.can anybody help me to recover the data.
below steps i have already tried
(1) remove both the controller and discharge the battery for 1 minute.then refix the both controller.
(2) tried with single controller
(3) tried with recover command from ctrl changes.
thanks in advance.









4 REPLIES 4
tejas pandya_1
Occasional Advisor

Re: hp 12h autoraid

can any body help me to recover the data
thanks in advance
r.l._1
New Member

Re: hp 12h autoraid

Hi ,

Please send me the following outputs from this server to analyse this issue.

#script /tmp/array.txt
#ioscan -fn
#arraydsp -i <<<< It will give you array ID
#arraydsp -a $id <<< Replace $id with array ID
#arraydsp -c $id
#logprint > /tmp/lp.txt
#exit


send me the follwoing files for analysis

1. /tmp/array.txt
2. /tmp/lp.txt
tejas pandya_1
Occasional Advisor

Re: hp 12h autoraid

i have not loaded the ARM on this server.
r.l._1
New Member

Re: hp 12h autoraid

Hi ,

Then send me the follwoing output.

# ioscan -fn
# sautil /dev/ciss$ ( Replace $ with all ciss files , check in ioscan output )


Also describe , what issue r u facing with this autoraid now .
?