Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

is 2dh supported on 1850r 500mhz+

Ayman Altounji
Valued Contributor

is 2dh supported on 1850r 500mhz+

I have seen conflicting reports as to whether using this Uscsi3 controller with the 4 bay Uscsi2 as found in 500mhz+ 1850r is supported. Any thoughts?

Thanks in advance
1 REPLY
Ayman Altounji
Valued Contributor

Re: is 2dh supported on 1850r 500mhz+

internal drive cage with optional 2 x 1" Ultra2/Ultra3 drive cage)
(Must be used in conjunction with the 4 x 1" Ultra2/Ultra3 Drive cage and an Ultra2/Ultra3 Controller.)

Wide Ultra2/Ultra3 SCSI Drive Cage Option Kit (2 x 1" )
(The ProLiant 1850R Pentium III Models can support up to six 1" Ultra2/Ultra3 hot plug drives on a single SCSI channel with the purchase of the optional 2 x 1" Ultra2/Ultra3 Drive Cage (388255-B21). The six drive configuration requires the purchase of an Ultra2/Ultra3 controller.) 388255-B21
Wide-Ultra SCSI-3 Drive Cage Option Kit.

The 64-bit, 66mhz PCI single channel wide ultra3 SCSI Adapter has External SCSI Connectors
68-Pin Wide Ultra2/3 SCSI, LVD Connector
Internal SCSI Connectors

68-pin Wide Ultra2/3 LVD SCSI Connector
68-pin Fast-Wide, Single Ended, SCSI Connector
50-pin narrow Fast-SCSI Connector
(The ProLiant 1850R Pentium III Models can support the same Wide-Ultra SCSI-3 drive configuration as the 6/400 & 6/450 Models with the purchase of the Wide-Ultra SCSI-3 Drive Cage Option Kit (103357-B21).)