Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

migrating from 2sl to 3200 boot failure

Ayman Altounji
Valued Contributor

migrating from 2sl to 3200 boot failure

W2K server w/sp2. Attempted to migrate from 2sl to 3200 and system blue screened with boot device inaccessable. I thought the driver for the 3200 is the same as the 2sl. Any suggestions?
1 REPLY
Ayman Altounji
Valued Contributor

Re: migrating from 2sl to 3200 boot failure

Have you gone into the System Configuration Utility (SCU) during POST and identified the 3200 as the new boot controller? You access the SCU by pressing F10 for the system partition. It should identify the new controller automatically and make sure you save those settings reboot.