Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

msa30 serial number in msa1500 enviroment

msa30 serial number in msa1500 enviroment

does anyone know if it is possible to input the serial number of a replaced MSA30 shelf so that it shows up in the "Show version -all" command as displayed below:


COHHPMSA01-RIGHT> show version -all
MSA1500 Firmware Revision: 7.00b1500 (SGA063802D)
Build Time: 2007-01-24 16:13:17
MSA1500 Hardware Revision: a [AutoRev: 0x010000]
Fibre Module AutoRev: 0x020000
SCSI I/O Module Bus 0 Revision: 2.02
SCSI I/O Module Bus 1 Revision: 2.02
SCSI I/O Module Bus 2 Revision: 2.02
SCSI I/O Module Bus 3 Revision: 2.02
Fan Control Module A Revision: 2.38
Fan Control Module B Revision: 2.38
Box 1 PROLIANT 4LEE Rev: CP20 (MDEGLMPX9J)
Box 2 PROLIANT 4LEE Rev: CP20 ()
Box 3 PROLIANT 4LEE Rev: CP20 (MDF4LMPX9J)
Box 4 PROLIANT 4LEE Rev: CP20 (MDENLMPX9J)
1 REPLY
John Kufrovich
Honored Contributor

Re: msa30 serial number in msa1500 enviroment

Daniel,

No, the serial numbers are programmed at the factory. It appears they missed one.

jk