Disk Enclosures
1748156 Members
4379 Online
108758 Solutions
New Discussion

Re: p2000 g3 (MSA) Controller B

 
KayC_1
Occasional Advisor

p2000 g3 (MSA) Controller B

Morning All,
Configuring a P2000 G3 with iSCSI.

VID 1 - Controller A Network: 192.168.1.2/24
VID 1 - Controller B Network: 192.168.1.3/24

VID 2 - iSCSCI Controller A: 192.168.2.2/24
VID 3 - iSCSI Controller B: 192.168.2.3/24

I have created Vdisks:
LUN 1 to disk controller A (6 HDDs RAID5)
LUN 2 to disk controller B (6 HDDs RAID5)

I can ping all the interfaces (LAN and iSCSI)

When i try to connect to controller A using iSCSI Init and init Vdisk no problems, can format etc..

When i try to configure Vdisk 2 (Controller B) i get iSCSI port issues in event log and i cannot connect, when switching LUN 2 to Controller A i can connect and map Vdisk 2...

Any ideas?

I so have have recreated the Vdisks twice unsuring its not a RAID issue...
Thanks,
KC.
1 REPLY 1
KayC_1
Occasional Advisor

Re: p2000 g3 (MSA) Controller B

Correction....

VID 2 - iSCSCI Controller A: 192.168.2.2/24
VID *2* - iSCSI Controller B: 192.168.2.3/24