Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

paircreate ends with PSUE status

Paul Hawkins
Frequent Advisor

paircreate ends with PSUE status

I have succesfully created many pairs but I have three taht end up with a state of PSUE (Initial Copy failure). I can't work out why this is happening...The pvol and svol are identical...The interesting thing is that they are all in the same CU. All other paircreates are fine except those in CU 5.
Thanks
2 REPLIES
IBaltay
Honored Contributor

Re: paircreate ends with PSUE status

Hi,
This could help you:
http://docs.hp.com/en/B7660-90013/ch06s11.html

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01389226/c01389226.pdf
(page 142)

PSUE is suspend - The P-VOL detects a failure in the S-VOL or the link and suspends mirroring.

b) The P-VOL changes its paired volume status to PSUE and keeps track of data changes in a difference bitmap

c. after the S-VOL or the link recover from the failure, the updated P-VOL is fed back to the S-VOL (pairsplit â S, paircreate
â vl, or pairresync command to update the P-VOL data by copying all data, or copying
differential data only).
the pain is one part of the reality
Bill Rothanburg
Trusted Contributor

Re: paircreate ends with PSUE status

You might also check your horcm.conf files.

I have a typo in one of mine that esentially defined the same svol for two different pvols in the same group, which caused the same error.