Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

raid mirror question

Simon Hyams
Occasional Contributor

raid mirror question

in a raid1 mirror, is one disk active and one passive? i.e. are they as equal as each other or is one "boss"?
in either case, if i take out the "slave" disk from a mirrored pair, and put it in a an identical server without breaking the mirror, will it still boot to that disk. i know if you use the "master" disk it will just say "other disk broken - insert new disk or fail it?" and you can still boot to it.
2 REPLIES
JohnWRuffo
Honored Contributor

Re: raid mirror question

Simon:

Are you using hardware or software RIAD?

Generally speaking you do not want to migrate just one disk of a mirror to a new server. You want to migrate the mirror set.

If you can give more detail to the question I have above, we can give you a much better answer.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
Steven Clementi
Honored Contributor

Re: raid mirror question

If you are using a Proliant Server with a Smart Array controller, then you can take EITHER the first disk OR the second disk and put it into another server and boot from it.

The key is, you need to put the drive in the same slot it was in originally.... example...

in a DL360, there is Drive Bay 0 and Drive Bay 1. If you take the drive out of Drive Bay 1, you need to put the drive BACK into Drive Bay one on the new DL360.

This is a quick and easy way to replicate a system, or have a cold backup on a shelf. Once you split the disks, make sure you re-populate the the second disk after the server boots so that the Smart Array can rebuild the mirror.

In RAID 1, there really isn't a master/slave. The Smart Array controller write to BOTH disks at the same time, but can read different data from each individual disk, which is why RAID 1 is better for read intensive applications.

Once you remove the drive, you have already broken the mirror. Let the server boot and insert the second drive AFTER your into the OS and you confirm everything is ok.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)