Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

relacing faulty disks on HVS200

mshhasan
Occasional Contributor

relacing faulty disks on HVS200

Hi,

I have just started working for this company and they had replaced few faulty disks on the array without removing them from the disk group, and then add the replaced disk to the disk group.
The setting on the Set System Operational Policies is set to manual.

So they have any issue on the virtual groups as some groups lost 2 disks and some virtual lost one disks.

As this is my first time using HVS200, could you please advice me what are the steps I have to take to solve this problem.

Thanks

3 REPLIES
Rob Leadbeater
Honored Contributor

Re: relacing faulty disks on HVS200

Rob Leadbeater
Honored Contributor

Re: relacing faulty disks on HVS200

Looks like that link's broken... Try here instead:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01077562/c01077562.pdf

Cheers,

Rob
mshhasan
Occasional Contributor

Re: relacing faulty disks on HVS200

Hi Rob,

Thank you very much for this document, itâ s very similar, but not the same as HSV200 as there is no redundancy check.

The disk was added to the group and it's:
Operation state: Attention
Leveling State: Pending
Leveling progress 100% leveled 0% to 100% is green.

Do I have to any action now or should wait till this cleared by it self.

Thanks