cancel
Showing results for 
Search instead for 
Did you mean: 

rpm of disk

UniRock
Regular Advisor

rpm of disk

How can I find "rpm" of a disk on a dedicated array remotely on hpux 11.11?

 

 

P.S. This thread has been moved from Disk to Disk Array. - HP Forum Moderator

4 REPLIES
Patrick Wallek
Honored Contributor

Re: rpm of disk

You would probably have to use some array specific utilities.

With typical disk arrays the HP-UX server does NOT see the individual disks. Instead you carve LUNs from the array to present to the server. The HP-UX server will just see the disk space and not care what the underlying infrastructure is for those LUNs.

Without knowing what type of array you have, it is impossible to answer your question.
Torsten.
Acclaimed Contributor

Re: rpm of disk

Again?


http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1218538

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Stan Sieler
Respected Contributor

Re: rpm of disk

Torsten writes:

> Again?
>
> http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1218538

but...that URL takes one to a page that
says "removed" :(
Torsten.
Acclaimed Contributor

Re: rpm of disk

I don't know why the mods sometimes remove threads so quickly ...

Depending on the type of array you should use the management tools to get details about the hardware. Get the disk model and look it up on the web.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!