sancopy incremental

[Ehrler]

Hello,
I have a EMC Question.
Is it possible to make an incremental sancopy.
HP-UX 11.11 / CX700
We have testet, but the changes from the source LUN are not on the destination LUN.???

[Devender Khatana]

Hi,

What options are using for this?

In HP arrays we have a product called business copy XP to achive this. You will have to use EMC couterpart for this there.

HTH,
Devender

[Ehrler]

I mean we have a config Problem.
In the Doku (EMC)I have found we must config a reserved lun to do a incremental sancopy. The Integrator mean, make a snapview and then the sancopy from snapview. ???
Regards
Ehrler

[Chris Callihan_1]

are both the source and destination arrays CX700's? are you mounting the destination copy to a host, or just letting it sit idle as a DR copy?

[Ehrler]

Hello,

the source and the destination are both on CX700. (one Array)

The problem is, the source and the destination LUN are activ lun's.
From time to time the developer need a refresh from the source lun. With SANCOPY, the destination lun are not update correct with incremental SANCOPY.
The Integrater mean, the destination lun has no track-file to protocol the changes.
No way ??

Best regards
Ehrler