Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

smart array controller emergency replacement (planing)

ArnoldMo
Occasional Contributor

smart array controller emergency replacement (planing)

Hi,

we are planing a setup with D2700 with P421 controller

we also have a few P800 and P212

if the P421 died, wuld pluging in the P212 or the P800 work?

 

 

P.S. This thread has been moved from General to Disk Array. - Hp Forum moderator

3 REPLIES
StorageMike
HPE Pro

Re: smart array controller emergency replacement (planing)

Hi

 

The quickspecs show it's compatible with the P212, the P800 isn't listed

 

http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04111697

 

Thanks

I work for HP

Click on the Kudos star if you think this post was useful :)
AnkitM
Trusted Contributor

Re: smart array controller emergency replacement (planing)

The D2000 enclosures support direct attach storage to ProLiant Servers with the HP Smart Array P411, P212, P812, P222, P421, P431, P441, P822 or the P841 Controllers.

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award KUDOS! to the person providing the answer. This helps others searching for a similar issue.
Johan Guldmyr
Honored Contributor

Re: smart array controller emergency replacement (planing)

And just to confirm: If you plug in a supported controller - it will get the RAID configuration from the disks - you might have to press Accept(F2 or such) after powering on the server (and install ADG/RAID6 license if this is used).