HPE Community
Disk Enclosures
1751858 Members
5496 Online
108782 Solutions
New Discussion юеВ

Re: stm

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

тАО01-27-2010 05:44 AM

тАО01-27-2010 05:44 AM

Solution

Re: stm

>> I am able to see them in other server with the same STM version.


I assume you see LUNs, not disks.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
MKR_1
Frequent Advisor

тАО01-27-2010 05:53 AM

тАО01-27-2010 05:53 AM

Re: stm

You are right Torsten.They are all LUNs.Thanks for the clarification
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО01-27-2010 06:00 AM

тАО01-27-2010 06:00 AM

Re: stm

Try to get the array ID from

# amdsp -i

then do

# amdsp -d

or better

# amdsp -a

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Michael Steele_2
Honored Contributor

тАО01-27-2010 12:57 PM

тАО01-27-2010 12:57 PM

Re: stm

Hi

This is not unusual. (* Right Torsten? :-) *)

Run 'rmsf -H' on the HW path to clear out the ioconfig file and the kernel and the /dev directory.

You probably have the same errors showing up under /etc/opt/resmon/logs.
Support Fatherhood - Stop Family Law
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.