Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

storageworks 4354

deheugden
Frequent Advisor

storageworks 4354

guys,

 

am looking for a manual to set up and configure the 4354, anyone who can help me with that?

 

thanks in advance

 

P.S. This thread has been moved from  Storage>General to  Disk Array. -HP Forum Moderator

6 REPLIES
giladzzz
Honored Contributor

Re: storageworks 4354

deheugden
Frequent Advisor

Re: storageworks 4354

Hi,

 

Many thanks for your reply. Did that, but those links dont point to the necessary documentation.


Regards,

 

 

deheugden
Frequent Advisor

Re: storageworks 4354

ok, got it a little bit working. Adaptec card is recognized(used the w2008r2 driver from adaptec), i can get into the adaptecs bios but the harddisks(11 are not recognized). Dont know if the other 3 empty slots needs to be filled with something.

Also, the lights of the 11 discs are not blinking on the unit.

 

Anyone??

Torsten.
Acclaimed Contributor

Re: storageworks 4354

What do you want to do with this old box? It must be more than 10 years old now.

 

Supported controllers are listed here:

 

http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04283713

 

A single disk today has more capacity than this whole box.

 

BTW, if I google the product, I get manuals within the first hits.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
deheugden
Frequent Advisor

Re: storageworks 4354

many thanks for the reply. The purpose is just form learning, not for real life use offcourse.

2nd, i googled also but no info about what could be the problem. Why the discs aren't enabled.

Torsten.
Acclaimed Contributor

Re: storageworks 4354

Dou you have a dual bus or single bus controller in the chassis? What scsi controller do you use?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!