va7410 rs-232 connector

[penelope_1]

Hello,

I have a little question that I'm being asked from above... I administer the va7410 from commandview, cvui menu/armdsp, etc.. I'm being asked about the rs-232 connector on the controller and am wondering if anyone knows of any documentation regarding specifically what is available with this and what information can be retrieved. I have connected and done HE to see the options, I'm just looking for some documentation on what all the options are for. I looked at the VA7410 website and browsed through those documents but don't see any detailed information on what information can be generated from that connection.

thanks in advance for any info.

[Torsten.]

The virtual front panel is "behind" this connector.
Basically there are the same commands available like from commandview (commandview: "armdsp", vfp: "vfpdsp" or "dsp").

But the commandview software has much more features. There are no "hidden" features on the vfp ;-)

[Torsten. · Accepted solution]

Some information is here:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00311965/c00311965.pdf

[Torsten.]

But more here:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg60188/lpg60188.pdf

[penelope_1]

thanks for the info