xp information

[Kgreen]

Hi Iam a bit new to the XP 12000 , I would appreciat eif anyone can help me on the below

1) Is there a shell script which would tell me how much storage I have allocated to a host on hp-ux.

2) I think my cluster systems are also showing those disk, how can I know how much storage is allocated , is there any script on hp-ux.

Thanks in advance

[Robin T. Slotten]

See if your HP person installed /usr/contrib/bin/xpinfo

# xpinfo

Scanning disk devices...

Device File : /dev/rdsk/c5t0d0 Model : XP???
Port : CL2A Serial # : 00060089
Host Target : 00 Code Rev : 5001
Array LUN : 00 Subsystem : 0004
CU:LDev : 00:00 CT Group : ---
Type : OPEN-E CA Volume : SMPL
Size : 13893 MB BC0 (MU#0) : SMPL
ALPA : 00 BC1 (MU#1) : SMPL
Loop Id : 7e BC2 (MU#2) : SMPL
SCSI Id : --- RAID Level : RAID5
FC-LUN : 0000eab900000000 RAID Group : 1-1
Port WWN : 60060e8004eab900 ACP Pair : 1
Disk Mechs : R107 R117 R127 R137

Device File : /dev/rdsk/c5t0d1 Model : XP???
Port : CL2A Serial # : 00060089
Host Target : 00 Code Rev : 5001
Array LUN : 00 Subsystem : 0004
CU:LDev : 00:1d CT Group : ---
Type : OPEN-E CA Volume : SMPL
Size : 13893 MB BC0 (MU#0) : SMPL
ALPA : 00 BC1 (MU#1) : SMPL
Loop Id : 7e BC2 (MU#2) : SMPL
SCSI Id : --- RAID Level : RAID5
FC-LUN : 0000eab90000001d RAID Group : 1-2
Port WWN : 60060e8004eab900 ACP Pair : 1
Disk Mechs : R100 R110 R120 R130

--------
You can also install the Command View Command Line Interface (CV CLI)

Go to your Command View screen. In the left pane click on support.

That should put you on a screen with the instructions and the downloadable client.