StoreOnce Backup Storage
1748204 Members
3095 Online
108759 Solutions
New Discussion юеВ

Re: Adding Virtual Tape Drives to VLS 6500

 
SOLVED
Go to solution
AdamBrindley
Occasional Contributor

Adding Virtual Tape Drives to VLS 6500

Hi,

I am trying to add 4 more virtual tape drives to our vls6500. I am very new to this and am a little unsure of what port mapping to assign.

We currently have 4 tape drives already, 2 are mapping to port 0 and 2 are mapped to port 1. Can I just add these other 4 to port 3???

Also what is this port mapping, sorry if these are very simple questions and I appreciate any answers
5 REPLIES 5
V├нctor Cesp├│n
Honored Contributor
Solution

Re: Adding Virtual Tape Drives to VLS 6500

Those are the 4 fiber channel ports on the library system node. You associate each library or drive with one of the ports, so it will appear there.
AdamBrindley
Occasional Contributor

Re: Adding Virtual Tape Drives to VLS 6500

That makes perfect sense.
Thank you very much
Wickedsunny
Valued Contributor

Re: Adding Virtual Tape Drives to VLS 6500

Hi,

For a future reference you can have this guide with you.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01679772/c01679772.pdf

Page 172 onwards has the best practices on creating drives and libraries.

Hope this helps.

Regards,
Sunny
AdamBrindley
Occasional Contributor

Re: Adding Virtual Tape Drives to VLS 6500

Thanks WickedSunny.

I did try and find that guide but had no luck finding it. Thank you both for your assistance
Wickedsunny
Valued Contributor

Re: Adding Virtual Tape Drives to VLS 6500

Glad that we were of some help.

Regards,
Sunny

Please rate solutions with points. It Keeps us going.