Disk-Based Backup
cancel
Showing results for 
Search instead for 
Did you mean: 

G2 Autoloader in VMWare

SBY
Occasional Visitor

G2 Autoloader in VMWare

I am trying to install a HP 1/8 G2 Autloader on a VMWare ESX 4.0 virtual server. I am using a Smart Array P212 and the server is a HP Proliant DL380 G7. I can get the system to see the tape drive but not thetape library. VMWare tell me this is a vendor specific issue.

 

2 REPLIES
Eric_de_Lange
Frequent Advisor

Re: G2 Autoloader in VMWare

This is autoloader is a multi-lun autoloader (see user manual). So tape drive and media changer device will use the same SCSI ID but on different luns. This is not supported VMware. It will just see the tape drive.

 

This restriction is documented in the EBS compatibillity Matrix of September 20211 which can be downloaded here:

http://h18000.www1.hp.com/products/storageworks/ebs/matrix_archives.html

page 29, keyword "multi target'

 

best regards,

-Eric

 

Sebastian.Koehler
Honored Contributor

Re: G2 Autoloader in VMWare

It is working for me at some smaller shops.

VMware Tape Drive pass-through
http://www.syncer.de/?p=147

Regards,
Sebastian
---
Please assign a KUDO to this post, if you find it useful.