Disk-Based Backup
cancel
Showing results for 
Search instead for 
Did you mean: 

SAN and Storeone

franciscolobo82
Occasional Visitor

SAN and Storeone

hi, good day to all people,

 I ihave a SW SAN 5100 Brocade with version firmware v6.4.3c (to old) and I need chek if this version cant work with astoreone 5100.

Is it possible any person in this forum tell me if this configuration work or where I can chek this information please?

regards

2 REPLIES
giladzzz
Honored Contributor

Re: SAN and Storeone

Hi

It will probably work you can look here

HPE Data Availability, Protection and Retention Compatibility Matrix

http://h20566.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=412183&docId=emr_na-c04616269&docLocale=en_US

or in  HPE SAN Design Reference Guide 

Regards

 

Sheldon Smith
Honored Contributor

Re: SAN and Storeone

Note: A Brocade 5100 is also known as the HP StorageWorks 8/40 SAN switch. The 5100 can be upgraded, one minor revision at a time (6.4 > 7.0 > 7.1 ...) to v7.4.1e.
A current support contract with Hewlett Packard Enterprise may be needed to download individual firmware bundles from the HPE Support site.


Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
----------
If my post was useful, click on my KUDOS! thumb below!