Disk-Based Backup
cancel
Showing results for 
Search instead for 
Did you mean: 

Setting ILO name on a VLS 6500 ?

Gareth H Wilson
Frequent Advisor

Setting ILO name on a VLS 6500 ?

We have a HP StorageWorks 6500-series Virtual Library System and it has an ILO card but when i go into the ILO it shows up as

Server Name: host is unnamed

we have configured the library and it has a dns name etc but it doesnt pick this up ? has anyone got this working ? are there any HP insight manager agents for the VLS ??
3 REPLIES
Sameer_Nirmal
Honored Contributor

Re: Setting ILO name on a VLS 6500 ?

The status will be shown if the HP Management agents are not installed on the host. iLO gets the server name through the agents.

Refer the link at
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00209014/c00209014.pdf

http://h20331.www2.hp.com/ERC/downloads/4AA0-8503ENW.pdf
Gareth H Wilson
Frequent Advisor

Re: Setting ILO name on a VLS 6500 ?

Thanks for the info but it doesnt look like there are any HP sim agents for the VLS6500 so im not sure how i would get this name set correctly :(
DonWilson
Occasional Advisor

Re: Setting ILO name on a VLS 6500 ?

The ILO features on the VLS are not currently supported. Management of this closed system is currently viewed as "self-contained".

Thanks
Don Wilson