Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk-Based Backup
cancel
Showing results for 
Search instead for 
Did you mean: 

-Urgent- Library fails to connect after disk replacement

RStanger
Occasional Collector

-Urgent- Library fails to connect after disk replacement

I replaced a failed disk in a D2D 2503i.

The array rebuilt itself as it should, all disks indicate everything is physically fine.

There is only one library configured on the device.

Since the drive has been replaced the library connection "fails to start".

I have tried changing the iSCSI initiator settings, but to no avail.

I am trying to recover a particular file for my customer but cannot.

Also, cannot Import or Inventory in BE 2010.

 

Can someone please advise?

 

Also, If I delete the library and rebuild it, will all of the data be lost?

 

Thank you.

 

 

P.S. This thread has been moved from Tape Backup (Small and Medium Business) to Disk-Based Backup. - Hp forum moderator

2 REPLIES
Johan Guldmyr
Honored Contributor

Re: -Urgent- Library fails to connect after disk replacement

Is everything OK on the D2D side?

 

Do you have connectivity (can you ping, etc)?

Ameya_Bapat
Occasional Visitor

Re: -Urgent- Library fails to connect after disk replacement

Hi,

From the issue description its clear that the issue is not with D2D Hardware, its actually the VTL Store that is failing to start. If the system was not shut down properly then D2D will have to go through 'integrity check' which can take several hours for VTL to start depending on the size of Store (VTL Carts). If you have already waited for couple of hours the you will have to contact HP Support to troubleshoot this issue.


Deleting & Recreating the Library will fix the issue but all the Data will be lost.