StoreOnce Backup Storage
1745922 Members
4148 Online
108723 Solutions
New Discussion

VLS 6000 DAF Connection with HP-UX BoX

 

VLS 6000 DAF Connection with HP-UX BoX

HI i am connecting VLS 6000 Direct attached fibre with HP-UX box. i have tried change the fibre setting in VLS but on HP-UX when i check fcmsutil /dev/td0 the link status is awaiting state. Appreciate any help for the configuration on DAF.
1 REPLY 1
Bill Costigan
Honored Contributor

Re: VLS 6000 DAF Connection with HP-UX BoX

I haven't configured a VLS to use direct attach but when I did this with an MSL library, I had to hardcode the FC-AL address. I used something like '2'
on the MSL. Once I did that the HPUX HBA connected fine.