Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk-Based Backup
cancel
Showing results for 
Search instead for 
Did you mean: 

VLS error during config

BrianDoyle
Trusted Contributor

VLS error during config

Hi,
I connected through the serial port to the VLS.

After logging in as Administrator, trying to change the network settings using "setConfigValue -ipaddr 192.x.x.x" we receive an error saying:
Failed to retrieve network config from server

Is it possible to configure the hosts file from the serial command prompt. The OS is RH Linux....

 

 

P.S. This thread has been moved from Tape Backup (Small and Medium Business) to Disk-Based Backup. - Hp forum Moderator

2 REPLIES
Mustafa Gulercan
Respected Contributor

Re: VLS error during config

hi Briano;
what is your VLS firmware version?
There is a known issue with HP StorageWorks Virtual Library System (VLS) using 1.1.0 firmware.
The VLS may end up in a non-functional state. This same problem was also recently found in VLS models using 2.0.0 firmware and has the same end result. If the VLS becomes non-functional, the only solution is to use the Quick Restore CD and re-image the VLS node.

summary;
upgrade your VLS firmware.

regards,
mustafa
BrianDoyle
Trusted Contributor

Re: VLS error during config

I've reinstalled using the Quick Install CD and was able to change network settings at the CLI.