Disk-Based Systems
Showing results for 
Search instead for 
Do you mean 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
Hi, today I would like to share my latest nightmare with vsa to give you a chance to prevent it. We have two two-site-vsa-clusters with 2 and 4 nodes each. They where installed 2011 with version 9.5 and afterwards upgraded up to 12.5. At two weeks ag...
Posted to:
Original author:
Hello, I've created 5,2 TB volume on MSA2040. ESXi host can see this storage device (LUN) but it recognizes it's capacity as 4,66 TB. How it is possible? Where is 500 GB? Thanks in advance!
Posted to:
Original author:
I replaced a drive that had a signficant number of reallocated sectors in a recently built RAID 5 array. I can't seem to get the array to rebuild, it is stuck with code 776 Redy For Recovery Logical Drive 1 Queued for rebuilding. Anyone know what the...
Posted to:
Original author:
Hello - I have a licensing question that I hope someone can help me with. We're looking at getting StoreVirtual VSA for three nodes with about 8 TB total disk space each. Does that mean we would need three 10 TB VSA licenses?
Posted to:
Original author:
I've looked and looked and looked and come up empty....so here I am! :-) I'm going to be likely purchasing the 3-pack of 4TB StoreVirtual 2014 VSAs. Can anyone tell me specifically where that 4TB limitation is implemented? The VSA's "Raw Space...
Posted to:
Original author:
Is it possialbe on the new StoreVirtual 3200 to add 4 SSD 400g drives to present to servers as a seperate LUN, from our second array of 8 - 900g SAS. It appears that it will only allow us to create volumes from a combined total from both arrays? How...
Posted to:
Original author:
For the SAN IQ upgrade you can also access HP guided troubleshooting tree for HP P4000 G2 SAN Solutions. Link for the same is : http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=12169&prodSeriesId=4118659&lang=en...
Posted to:
Original author:
I was. 3 NSMs were happy with the settings, but one was not. All using 9.5.00.1215.0. I re-applied the settings and still no luck. Solution: Edit Email Settings for the cluster Change the SMTP server port from the default (25) to something else (26)...
Posted to:
Original author:
Hi Michel, those f/w components can only be upgraded via the OA CLi. - Telnet into the OA - run the command SHOW UPDATE to list the current and latest f/w versions. - run the command UPDATE DEVICE BLADE X (where x is the bay number) - you can also ru...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot ThreadHot Thread
  • Replied-to Thread Replied-to Thread
  • Read Only ThreadRead Only Thread
Events
Nov 29 - Dec 1
London
Discover 2016 London
Learn how to thrive in a world of digital transformation at our biggest event of the year, Discover 2016 London, November 29 - December 1.
Read more
Each Month in 2016
Online
Software Expert Days - 2016
Join us online to talk directly with our Software experts during online Expert Days. Find information here about past, current, and upcoming Expert Da...
Read more
View all
Top Authors
Advisor
4
Advisor
1
Acclaimed Contributor
4207
View all