Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

101-I/O ROM Error

Ayman Altounji
Valued Contributor

101-I/O ROM Error

ML530, SA5302, Intel Pro S 100 NICs. After running through SmartStart and doing the Array configuration, it reboots to the following error:

101-I/O ROM Error

If I remove one of the NICs (doesn't matter which one) it boots fine without the 101-I/O ROM Error. Have tried different NICs, different SA, different slots, same results, won't boot with two NICs.

BIOS on SA and System board are latest revs. NICS in slot 2 ad 6 and SA in slot 7. Have used this exact same config on several servers without a problem. These are two new servers I just got in.

Called support and they are escalating the case but wanted to know if anyone out here had any ideas.

Thanks,
Bob
1 REPLY
Ayman Altounji
Valued Contributor

Re: 101-I/O ROM Error

There is supposedly a fix for this problem if anyone is interested.

ftp://ftp.compaq.com/pub/softpaq/sp16001-16500/

you need SP16371.

Bob