Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

1783 Error on Smart 4200 Array Controller

Christopher M. Ryan
Occasional Visitor

1783 Error on Smart 4200 Array Controller

I've applied the latest Rompaq (1.48) for this controller and I still get a 1783 error at post on this controller. It's installed in a Proliant 7000 (PentPro). I hit F1 and the server boots normally and all disk arrays are working nicely. No other problems. What do you think?
1 REPLY
Marco Hogeveen
Honored Contributor

Re: 1783 Error on Smart 4200 Array Controller

This is the description of the 1783 error:
If this message appears immediately following a ROM installation, the ROM is defective or not installed properly. Check to see if the Array Accelerator board is attached properly. Check that the array controller is firmly inserted in its slot. Try upgrading the System ROMs. Otherwise, replace the Smart Array Controller.

Hope this helps,

Marco