Disk Enclosures
1748263 Members
3697 Online
108760 Solutions
New Discussion

2 rp3410 servers to a MSA30MI storage

 
kenny chia
Regular Advisor

2 rp3410 servers to a MSA30MI storage

I am thinking of configuring 2 rp3410 servers to connect to a single MSA30MI storage.
The storage will be split into 2 portions and each portion assigned to each rp3410.
Please see attachment for details.
Is this configuration possible?
All Your Bases Are Belong To Us!
1 REPLY 1
Torsten.
Acclaimed Contributor

Re: 2 rp3410 servers to a MSA30MI storage

Hi,

you don't want to share the disks between the servers, right?
In this case your config looks good.

How do you want to configure RAID5 - Smartarray controller od VxVM?

In case you are using "normal" SCSI controllers - you need to adjust one of them in each server from SCSI ID 7 to 6 (using mptconfig) *before* connecting the cables.

Example:

# mptconfig -i 6 /dev/mpt10

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!