HPE Community
Disk Enclosures
1752790 Members
6274 Online
108789 Solutions
New Discussion

Re: 4000 disks moving to 6100

 
SOLVED
Go to solution
Prokopets
Respected Contributor

‎02-08-2010 07:42 AM

‎02-08-2010 07:42 AM

4000 disks moving to 6100

Hi!
I have two EVAs: 4000 2c2d and 6100 2c6d and i want to move disk enclosures from 4000 to 6100. I know that 4000 and 6100 enclosures have different partnumbers, but anyway - is there a possibility to do such trick?
0 Kudos
Reply
1 REPLY 1
Víctor Cespón
Honored Contributor

‎02-08-2010 08:04 AM

‎02-08-2010 08:04 AM

Solution

Re: 4000 disks moving to 6100

The difference between the enclosures are the I/O modules. They use the same disks. Just make sure the disks have the firmware updated, the EVA6100 will have firmware 6110 at least and you need the disks to have compatible firmware.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01898270/c01898270.pdf
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.