Disk Enclosures
1748158 Members
4186 Online
108758 Solutions
New Discussion

Re: A CLUSTER LOCK DISK HAS FAILED (I/O ERROR)

 
jaminas
Advisor

A CLUSTER LOCK DISK HAS FAILED (I/O ERROR)

Hi,
I have HP-UX 10.20B box with High Availability ARRAY. One of the cluster lock disks has failed and the system reported that if not repaired it could cause one of the nodes to crash. the said disk is c1t0d0 and kept showing this messages on my console terminal. Pls. how do I get about solving this.

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: A CLUSTER LOCK DISK HAS FAILED (I/O ERROR)

Hi,

sounds like you are using a HA disk system (not an array). You should replace the faulty disk asap and restore the config (vgcfgrestore).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!