HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

AIX 5.3 MPIO and MA8000

 
SOLVED
Go to solution
ianvt
Advisor

AIX 5.3 MPIO and MA8000

We are trying to get AIX 5.3 MPIO to work with a MA8000. AIX recognises the LUNS but MPIO does not. Does anybody else have any experience with this?
Ian
5 REPLIES
Vincent Fleming
Honored Contributor
Solution

Re: AIX 5.3 MPIO and MA8000

Ian,

Two things - AIX 5.3 is not yet supported with MA8000, and MPIO is not supported with MA8000.

You would need to use HP's SecurePath software (minimum rev 2.0C)for multipath, if it were supported on AIX 5.3. It's not yet.

Can you use AIX 5.2?

Cheers,

Vince



No matter where you go, there you are.
ianvt
Advisor

Re: AIX 5.3 MPIO and MA8000

Thanks Vince. It is what I suspected. I will check to see whether we can use AIX 5.2.

Ian
Peter Mattei
Honored Contributor

Re: AIX 5.3 MPIO and MA8000

AIX 5.2 with the MA8000 is supported with SecurePath v2.0C and either the 2Gbit HBA HP A7539A or the older 1Gbit HBA HP 197819-B21.

I doubt that MPIO will ever be supported on the HSG controller.

Sorry for that
Peter
I love storage
ianvt
Advisor

Re: AIX 5.3 MPIO and MA8000

Thanks to Vince and Peter for the assistance.

Ian
Darius Rudzika
Occasional Advisor

Re: AIX 5.3 MPIO and MA8000

Hello,

http://h18006.www1.hp.com/products/storage/software/amss/index.html

supports HSG controllers
"In pure practice - everything woks, but nothing clear. In theory - everything clear, but nothing works. In most favorable case when theory meets practice - nothing works and nothing clear"