HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Accelerator errors

 
Ayman Altounji
Valued Contributor

Accelerator errors

Has anyone seen problems with the array accelerator showing any errors in Insight Manager EX or with array digs? I currently have 10 ML530 servers installed with net ware 5.0 and 6 of the 10 servers are reporting errors on the accelerator board. They are reporting 2563 read errors and 130 write errors (the same on all 6 servers). I have been working with compaq support but, they have never herd of any other problems like this one. Compaq sent me 2 new 5302/64 array controllers and after installing them and running array digs they reported the same error again with the new controllers. If I move a controller from 1 of the servers not reporting errors into a server that is, the errors go away. Does anyone have any ideas?
Thanks in advance for any comments,
Mike
1 REPLY
Ayman Altounji
Valued Contributor

Re: Accelerator errors

Mike

Yes I have. Same issue no resolution and does not seem to creat any issues for the server functionality...

Have you found a resolution yet?