HPE Community
Disk Enclosures
1751712 Members
4984 Online
108781 Solutions
New Discussion

Re: Adding MSA70 to MSA P2000 G3

 
tsey
Occasional Contributor

‎02-25-2013 04:25 AM

‎02-25-2013 04:25 AM

Adding MSA70 to MSA P2000 G3

Hello all

 

i want to add 3 MSA70 enclosures to my currently in production MSA P2000 G3. i read here that in order to do so the MSA70 must have the firmware update of 2.18 or later. here is my question:

1. how can i determine the the current firmware version of my MSA70?

2. what is the procedure to upgrade the firmware?

 

any help would be much appreciated.

0 Kudos
Reply
1 REPLY 1
AnkitM
Trusted Contributor

‎02-27-2013 06:05 AM

‎02-27-2013 06:05 AM

Re: Adding MSA70 to MSA P2000 G3

You can determine current firmware version from the ADU Report.
In order to get the ADU Report, you will need to install http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468781&lang=en&cc=us&prod on the host.

2. You may upgrade the firmware if the new updates are available by following installation instructions here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3355735&prodTypeId=12169&prodSeriesId=3355734&swLang=8&taskId=135&swEnvOID=1005
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award KUDOS! to the person providing the answer. This helps others searching for a similar issue.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.