Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding a Hard Disk

Ayman Altounji
Valued Contributor

Adding a Hard Disk

I have a smart array 4200 with one 18GB Hard Disk connected. On the NT system this HD has two logical drives, onde c: with 4.0GBytes and e: with 14GBytes.
I will add another hard disk, also 18GBytes, to this smart array controller. I want that my logical drive e: expands adding this additional 18GBytes to it.
So the final desired configuration would be:

C: 4.0GBytes
E: 14 + 18 GBytes

Is that possible ?

Thanks in advance for any help.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Adding a Hard Disk

Should not be an issue. The ACU should be able to do this, but if the firmware is old enough on that controller, you may have to go into Disk Administrator and create a "volume set" between the existing E: drive and the new "free space"...