HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Auto Path XP for Windows 2000 with two Agilent FC HBA cards?

 
Pedro Magalhaes_1
Occasional Contributor

Auto Path XP for Windows 2000 with two Agilent FC HBA cards?

Looking for someone that already have done the following implementation:

1. XP512
2. Brocade switches 2800 ( 2 )
3. Two FC HBA cards from Agilent ( D8602A/B )
4. Windows 2000 Advanced Server
5. Auto Path XP for Windows 2000
6. NetServer system ( LT6000r )
3 REPLIES
Mark van Silfhout
Trusted Contributor

Re: Auto Path XP for Windows 2000 with two Agilent FC HBA cards?

I've done such a configuration, only than on a netserver LHr3.
Joe Colucci_1
Frequent Advisor

Re: Auto Path XP for Windows 2000 with two Agilent FC HBA cards?

Pedro,

If you are still looking for someone doing this implementation, I am in the process of doing almost the same exact thing. What is your question?

--Joe
Vincent Fleming
Honored Contributor

Re: Auto Path XP for Windows 2000 with two Agilent FC HBA cards?

I've run into a problem with this myself. I'm now told that there is a driver problem with having 2 8602B cards in the same Netserver. I was told to use the QLogic cards (QLA2100 or QLA2200), as the drivers work better.
No matter where you go, there you are.