Autoraid Model 12 - F/W HP27

[Richard Munn]

Does anyone know where I can find firmware HP27 for the AutoRAID model 12?

I knonw it exists but I can't seem to find it anywhere.

P.S. This thread has been moved from General to Disk Array. - Hp Forum Moderator

[S.K. Chan]

It seems only HP25 is available ..
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co350en〈=English+%28US%29&locale=en_US
.. and I couldn't find HP27 except for 12H which the latest is HP62 ..
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co434en〈=English+%28US%29&locale=en_US
This thread may help ..
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x86ce50dde50cd71190050090279cd0f9,00.html

[Eugeny Brychkov]

Richard,
it exists, but looks like not on the web. Following SK's link I've found souce ftp location where all firmwares are stored ftp://ftp.hp.com/pub/information_storage/software/ . No HP27, only HP25. I think to obtain HP27 you have to call HP
Eugeny

[Eugeny Brychkov · Accepted solution]

Looks like I've found it... should be reading pages thoroughly!
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=19162&locale=en_US&taskId=135&prodSeriesId=33733&prodTypeId=12169
"ard_hp62-hp27.lif 7.85MB" or "dfdutil_vhp62-hp27.lif 3.10MB". These are lif images should be copied to the tape (hpux) with
dd if= of=/dev/rmt/0m bs=2k
and this tape becomes bootable. Read readme file, boot from tape and flash autoraid 12 with HP27 image (note: NOT HP62 - it's for 12h)
Eugeny