HPE Community
Disk Enclosures
1753304 Members
6398 Online
108792 Solutions
New Discussion

Blade server issue

 
vaseemuddin
Occasional Advisor

‎05-11-2011 04:31 AM

‎05-11-2011 04:31 AM

Blade server issue

Hello,

We have HP bladeserver BL480C with widows 2003 R2 STD, the server was working fine and now suddenly it gives “Non system disk or disk error replace and strike any key”, i donot have the recovery CD to repair this, can you please let me know the best possible way of handling the issue rather than installation
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎05-11-2011 04:40 AM

‎05-11-2011 04:40 AM

Re: Blade server issue

Why you place this question in storage, not in server forum?

However, this could happen if your first boot device is non-bootable, e.g. you have a USB or virtual DVD connected.

Check the boot order during boot, check also the health and status of the raid by pressing F8 during boot.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.