Business Copy XP

[Joaquin Gil de Vergara]

I reach limit in horcm.conf due to each BC LUN is identified by x and y where x,y are target and lun from device file cztxdy from BC luns

LUN 7F is czt15d7 and LUN 80 is c(z')t0d0

how can i diferrentiate LUN 80 from LUN 00 in horcm template (card instance is not specified here!)?

Thanks in advance

[Sanjay Kumar Suri · Accepted solution]

Hello

In case of Business copy XP or Continuous Access XP always use the following command to determine the correct TID and LU#.

# raidscan -p port -fx

Sample output of above command is given below

Port TID LU#CU LDEV
CL1-H / da/ 7, 2, 3.1(6).............S-VOL SSUS ASYNC 6, ----- d4
CL1-H / da/ 7, 2, 4.1(16)............S-VOL SSUS ASYNC 16, ----- d5

This requires Raid Manager instance.

Regards.

Sanjay

[Sanjay Kumar Suri]

To add further to my reply:

1st line: TID = 2, LU#=3
2nd line: TID = 2, LU#=4

Thanks

[ESC Team]

Just continue the sequence using Target '16'.

Regards, Maurice.