CV EVA 7

[DJMC]

Hi
can anyone tell me what the default username and password is for CV EVA 7.0. All the doc's which I have say it should be administrator but this dosen't work. It is a new install of CV.

Thanks
Dec

[IBaltay · Accepted solution]

Hi
you should add either the local user account or the AD account to the HP Storage Admin group

[Steven Clementi]

Dec:

Check the Local groups on the server where Command View is installed.

If you have have a "HP Storage Admins" and "HP Storage Users" group, make sure the Administrator is part of the "HP Storage Admins" group and retry logging in.

IF CV was installed with the Domain Security option, then you will need to manually create a "HP Storage Admins" group in your domain and add the administrator to it.


Steven

[DJMC]

All,
Thanks for your help. I hadn't added the user to the admin group.

But, now I have got into CV I can't see my EVA. I can see the two 4000's but not the 4400. Can an EVA4400 be managed by CV 7.0?

Dec

[skris]

Hi DMC,
The EVA 4400 Cannot be managed from CV EVA 7.

Support for EVA 4400's are only available from Command view 8 And Above. You could install Command view 8 and manage all the EVA's off it.

Quickspecs for 4400:
http://h18000.www1.hp.com/products/quickspecs/12893_na/12893_na.html


Cheers!
Shiva

[IBaltay]

CommandViewEVA 8.0 release notes:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01499078/c01499078.pdf

CommandViewEVA 8.01 release notes:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01487268/c01487268.pdf

CommandViewEVA 8.02 release notes:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01564942/c01564942.pdf

and here is the EVA software compatibility guide:
EVA 4400 CommandView (CVE) compatibility is on page 5 and its depending on the controller firmware:
CVE 8.0 is compatible with the firmwares 09000 and 09001
CVE 8.01 and 8.02 is compatible with the firmware 09003 and 09004

[IBaltay]

Sorry, I missed the EVA sotfware compatibility reference doc link:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01525950/c01525950.pdf

[Steven Clementi]

Make sure you un-install Command View 7 fully first before installing Command View 8.

You can not upgrade CV7 to CV8.

Command View 8.0.1 upgrade and 8.0.2 upgrade can be found here...

" http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3664271&prodTypeId=12169&prodSeriesId=471497&swLang=13&taskId=135&swEnvOID=1005 "

You will need to install CV 8.0 first.

Steven