HPE Community
Disk Enclosures
1754014 Members
7439 Online
108811 Solutions
New Discussion

CVSDM configuration problems

 
Emilio Nunez
Occasional Contributor

‎04-09-2008 08:21 AM

‎04-09-2008 08:21 AM

CVSDM configuration problems

Hi Friends, I have a rx1620 and a rx2620 connected to a VA7110,
all the configuration to the Array was done using CVSDM installed on rx2620,
so we moved the rx1620 (ip changed) and the va7110 to a new physical location
and rx2620 was left with internal storage only , well here starts the problem,
rx1620 still "seeing" its LUN's with no problem but when I try to configure (create LUN)
the VA7110 using the CVSDM installed there (rx1620) I am not able to do it
when I run the launcher I am receiving
"error getting database reference from localhost"
and appears the SDM screen with no data, I will appreciate any help...thanks a lot.
.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎04-09-2008 10:45 AM

‎04-09-2008 10:45 AM

Re: CVSDM configuration problems

Check these files and restart the daemons after modification:

/opt/sanmgr/hostagent/config/access.dat
/opt/sanmgr/hostagent/config/commIpAddr.txt

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.