Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Can you replace from the VA7110 to VA7100 with controller exchange?

SOLVED
Go to solution

Can you replace from the VA7110 to VA7100 with controller exchange?

Hello~
I have VA7110 Storage.
Because VxVM(Veritas) don't support VA7110 Storage under MC/SG for RAC.
And I have the extra Va7100 Controller Part.
So I will exchange the controller between Va7110 and Va7100.

When they exchange the controller, they work well?
Is it possible to exchange the controller ?

Thank you~~
1 REPLY
krusty
Honored Contributor
Solution

Re: Can you replace from the VA7110 to VA7100 with controller exchange?

You can replace the controller, however it requires a formatting of the array. All data is lost. All of the VA controllers (7100, 7110, 7400, 7410) use the same main enclosure, the only difference is the controllers. Also the VA7100 only supports only the main enclosure and no add-on enclosures. So if you have any add-on enclosures, they would have to be removed (hence the required formatting)

You cannot mix controllers (I think you were looking to do a rolling downgrade to a VA1700, if I read you right). You may want to check if the memory in the VA7110 controller is supported on the VA7100. I don't believe the 1024MB DIMMs are supported on the VA7100.

Here's the link on how to upgrade from a VA7100 to a VA7110 (I assume you reverse it to go the other way)

http://h200006.www2.hp.com/bc/docs/support/SupportManual/lpg60195/lpg60195.pdf
"In Vino Veritas"