Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot access Logical drives on MSA1500 based SAN disks

Osas
Occasional Visitor

Cannot access Logical drives on MSA1500 based SAN disks

Please I need help in solving this dilemma.

We have a MSA1500 based SAN with 16 300GB Disks .This has 5 Windows 2003 servers connected it.

There was a power outage yesterday and this morning we discovered that
none of our servers is able to access the contents of the disks on the
SAN any longer and the logical drives under disk manager are
being shown as offline. On trying to reactive the disks we get the
following error messages on Eventviewer right now are:

Event ID: LDM Event Source:2
INTERNAL Error - The disk group contains no valid configuration copies
(C10000B6).

Event ID: LDM Event Source:1500
Disk group VenusDg0: Errors in some configuration copies:
Disk Harddisk2, copy 1: Block 1: A format error was found in the
configuration copy
Disk Harddisk3, copy 1: Block 1: A format error was found in the
configuration copy
Disk Harddisk4, copy 1: Block 1: A format error was found in the
configuration copy
Disk Harddisk5, copy 1: Block 1: A format error was found in the
configuration copy
Disk Harddisk6, copy 1: Block 1: A format error was found in the
configuration copy
Disk Harddisk7, copy 1: Block 1: A format error was found in the
configuration copy

On running the Array Diagnostics Utility, we obtained the following
log:

Array Diagnostic Utility Version 7.40.7.0
Array Diagnostic Utility Inspection Report Version 7.40.1.0

Date/Time: Wednesday, May 02, 2007 9:29:03AM
Computer Model: HP Server


SLOT SUMMARY:
Slot Num Slot Type Array Controllers and Host Adapters Detected
-------- --------- --------------------------------------------
SLOT 1 PCI PCI Based Fibre Channel Adapter
|
-(ID 65536) MSA1500 Array Controller


SLOT 1 (ID 65536) MSA1500 Array Controller ERROR REPORT:

Error occurred reading RIS copy from SCSI Port 1 Drive ID 0
Error occurred reading RIS copy from SCSI Port 1 Drive ID 1
Error occurred reading RIS copy from SCSI Port 1 Drive ID 2
Error occurred reading RIS copy from SCSI Port 1 Drive ID 3
Error occurred reading RIS copy from SCSI Port 1 Drive ID 4
Error occurred reading RIS copy from SCSI Port 1 Drive ID 5
Error occurred reading RIS copy from SCSI Port 1 Drive ID 8
Error occurred reading RIS copy from SCSI Port 1 Drive ID 9
Error occurred reading RIS copy from SCSI Port 2 Drive ID 0
Error occurred reading RIS copy from SCSI Port 2 Drive ID 1
Error occurred reading RIS copy from SCSI Port 2 Drive ID 2
Error occurred reading RIS copy from SCSI Port 2 Drive ID 3
Error occurred reading RIS copy from SCSI Port 2 Drive ID 4
Error occurred reading RIS copy from SCSI Port 2 Drive ID 5
Error occurred reading RIS copy from SCSI Port 2 Drive ID 8

SUBSYSTEM INFORMATION:

Backplane Slot: 0
Chassis Serial Num: SGA053801D
This Controller
World Wide Name: 0x500508b30091b661
Array Serial Number: P56350HX3S60GA
Cache Serial Number: Not Available
Other Controller
World Wide Name: Not Available
Array Serial Number: Not Available
Cache Serial Number: Not Available
Storage Subsystem
System Ctlr Board Serial Num: SGA053801D
Pwr Backplane Bd Serial Num: P74280AX3S7090
Drv Backplane Bd Serial Num: P74280AX3S7090
Fan Module Bd Serial Num: SGA053801D
1st Power Supply Serial Num: SGA053801D
2nd Power Supply Serial Num: SGA053801D
Pwr Bay Fan Mod Serial Num: SGA053801D

CONTROLLER IDENTIFICATION:
Configured Logical Drives: 6
Configuration Signature: 0xa0a99f37
Controller Firmware Rev: 5.02
Controller ROM Revision: 5.02
Controller Hardware Rev: 0x00
Boot Block Version: 0.10
Board ID: 0xe0100e11
Cable or Config Error: 0x00 (No)
Invalid Host RAM Address: No
CPU Revision: 0x02
CPU to PCI ASIC Rev: 0x03
Cache Controller ASIC Rev: 0xff
PCI to Host ASIC Rev: 0x02
Marketing Revision: 0x41 (Rev A)
Expand Disable Code: 0x01
SCSI Chip Count: 4
MaximumBlocks: 00008190
Controller Clock Count: 8096
Max SCSI IDs per Bus: 32
Big Drive Map: 0x033f 0x0000 0x033f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Ext Drive Map: 0x033f 0x0000 0x033f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Non-Disk Drive Map: 0x0040 0x0000 0x0040 0x0000 0x0000 0x0000 0x0000 0x0000
Host I2C Autorev: 0x00 (level of hardware and programmable logic devices)
CPLD Revision: 0x00 (code level used in the programmable logic devices)
Fibre Chip Count: 1
Recovery ROM Inactive
Image Revision: 5.02
Recovery ROM Active Image
Flags Status: 0x01

REDUNDANT CONTROLLER PARAMETERS:

Red. Ctlr Modes Supported: 0x05 (Active/Standby)
(Disable Standby Controller supported)
Current Redundancy Mode: 0x00 (Not Currently Redundant)
Red. Controller Status: 0x04
This controller is Preferred
Red. Operation Failures: 0x00
No failures
Red. Operation Warnings: 0x00000000
No Warnings
Preferred Slot Control: 0x00
Lower (or Right) Slot contains this controller.
Lower (or Right) Slot contains Primary ctlr at power-up.
Current Ctlr Identifier: 0x500508B30091B661
Linked Ctlr Identifier: 0x0000000000000000
Common Ctlr Identifier: SGA053801D
Current Ctlr Type: 0x40 (MSA1000 Controller)
Linked Ctlrs Type: 0x00 (RA4x00 Controller)

LOGICAL DRIVE IDENTIFICATION:

Logical Drive 1:
Sector Size: 512
Sectors Available: 614402047
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
BIOS Disabled: No
Logical Drive Ident: 0xffffffff
Logical Drive Label: A529CE0BP56350HX3S60GADEDF

Logical Drive 2:
Sector Size: 512
Sectors Available: 1638402047
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
BIOS Disabled: No
Logical Drive Ident: 0xffffffff
Logical Drive Label: A249DE31P56350HX3S60GA95AE

Logical Drive 3:
Sector Size: 512
Sectors Available: 2048002047
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
BIOS Disabled: No
Logical Drive Ident: 0xffffffff
Logical Drive Label: A0E9EE61P56350HX3S60GA1224

Logical Drive 4:
Sector Size: 512
Sectors Available: 1024002047
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
BIOS Disabled: No
Logical Drive Ident: 0xffffffff
Logical Drive Label: A909FE8AP56350HX3S60GA2B36

Logical Drive 5:
Sector Size: 512
Sectors Available: 1638402047
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
BIOS Disabled: No
Logical Drive Ident: 0xffffffff
Logical Drive Label: ACA98EF7P56350HX3S60GA3C9C

Logical Drive 6:
Sector Size: 512
Sectors Available: 653962012
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
BIOS Disabled: No
Logical Drive Ident: 0xffffffff
Logical Drive Label: A0A99F37P56350HX3S60GA5BF8

LOGICAL DRIVE CONFIGURATION:

Logical Drive 1:
Configuration Signature: 0xa529ce0b
Mapping Scheme: Multiple Block
Physical Drives: 16 (number not valid after drive movement)
This Logical Drive: 15 (excluding spare drives)
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
Distribution Factor: 32
Operating System: 64768
Controller Order: 0
Additional Information: 0
Offset to Data: 0
Backed-out Write drives: 0
Stripes for Parity: 16
Distribution Mode: 0x00
Int 13h Support Enabled: Yes
Sectors on Volume: 614402047
Sectors per Drive: 47261696
Big Drive Assignment Map: 0x033f 0x0000 0x013f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare Assignment Map: 0x0000 0x0000 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000
Array Accelerator is enabled for this logical drive.

Logical Drive 2:
Configuration Signature: 0xa249de31
Mapping Scheme: Multiple Block
Physical Drives: 16 (number not valid after drive movement)
This Logical Drive: 15 (excluding spare drives)
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
Distribution Factor: 32
Operating System: 64768
Controller Order: 0
Additional Information: 0
Offset to Data: 47261696
Backed-out Write drives: 0
Stripes for Parity: 16
Distribution Mode: 0x00
Int 13h Support Enabled: Yes
Sectors on Volume: 1638402047
Sectors per Drive: 126030944
Big Drive Assignment Map: 0x033f 0x0000 0x013f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare Assignment Map: 0x0000 0x0000 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000
Array Accelerator is enabled for this logical drive.

Logical Drive 3:
Configuration Signature: 0xa0e9ee61
Mapping Scheme: Multiple Block
Physical Drives: 16 (number not valid after drive movement)
This Logical Drive: 15 (excluding spare drives)
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
Distribution Factor: 32
Operating System: 64768
Controller Order: 0
Additional Information: 0
Offset to Data: 173292640
Backed-out Write drives: 0
Stripes for Parity: 16
Distribution Mode: 0x00
Int 13h Support Enabled: Yes
Sectors on Volume: 2048002047
Sectors per Drive: 157538624
Big Drive Assignment Map: 0x033f 0x0000 0x013f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare Assignment Map: 0x0000 0x0000 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000
Array Accelerator is enabled for this logical drive.

Logical Drive 4:
Configuration Signature: 0xa909fe8a
Mapping Scheme: Multiple Block
Physical Drives: 16 (number not valid after drive movement)
This Logical Drive: 15 (excluding spare drives)
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
Distribution Factor: 32
Operating System: 64768
Controller Order: 0
Additional Information: 0
Offset to Data: 330831264
Backed-out Write drives: 0
Stripes for Parity: 16
Distribution Mode: 0x00
Int 13h Support Enabled: Yes
Sectors on Volume: 1024002047
Sectors per Drive: 78769408
Big Drive Assignment Map: 0x033f 0x0000 0x013f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare Assignment Map: 0x0000 0x0000 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000
Array Accelerator is enabled for this logical drive.

Logical Drive 5:
Configuration Signature: 0xaca98ef7
Mapping Scheme: Multiple Block
Physical Drives: 16 (number not valid after drive movement)
This Logical Drive: 15 (excluding spare drives)
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
Distribution Factor: 32
Operating System: 64768
Controller Order: 0
Additional Information: 0
Offset to Data: 409600672
Backed-out Write drives: 0
Stripes for Parity: 16
Distribution Mode: 0x00
Int 13h Support Enabled: Yes
Sectors on Volume: 1638402047
Sectors per Drive: 126030944
Big Drive Assignment Map: 0x033f 0x0000 0x013f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare Assignment Map: 0x0000 0x0000 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000
Array Accelerator is enabled for this logical drive.

Logical Drive 6:
Configuration Signature: 0xa0a99f37
Mapping Scheme: Multiple Block
Physical Drives: 16 (number not valid after drive movement)
This Logical Drive: 15 (excluding spare drives)
Fault Tolerance Mode: Advanced Data Guard (RAID ADG)
Logical Param Table: cyl=65535 heads=255 sec/track=32 xlate sig=0x0
Distribution Factor: 32
Operating System: 64768
Controller Order: 0
Additional Information: 0
Offset to Data: 535631616
Backed-out Write drives: 0
Stripes for Parity: 16
Distribution Mode: 0x00
Int 13h Support Enabled: Yes
Sectors on Volume: 653962012
Sectors per Drive: 50304796
Big Drive Assignment Map: 0x033f 0x0000 0x013f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare Assignment Map: 0x0000 0x0000 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000
Array Accelerator is enabled for this logical drive.

LOGICAL DRIVE STATUS:

Logical Drive 1:
Drive Status: OK
Blocks to Rebuild: 0
Blocks Re-mapped:
Spare Status Flags: 0x21
At least 1 physical drive is configured as an on-line spare
An on-line spare drive is available for activation
Spare to Replaced Map: See Big Spare to Replace Map:
Media Was Exchanged: No
Cache Failure: No
Expand Failure: 0x00
Unit Flags: 0x00
Big Remap Count: All Counts Zero
Big Drive Failure Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Replacement Drive Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Active Spare Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare to Replace Map: No spares have replaced any drives
Big Spare Marked OK Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

Logical Drive 2:
Drive Status: OK
Blocks to Rebuild: 0
Blocks Re-mapped:
Spare Status Flags: 0x21
At least 1 physical drive is configured as an on-line spare
An on-line spare drive is available for activation
Spare to Replaced Map: See Big Spare to Replace Map:
Media Was Exchanged: No
Cache Failure: No
Expand Failure: 0x00
Unit Flags: 0x00
Big Remap Count: All Counts Zero
Big Drive Failure Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Replacement Drive Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Active Spare Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare to Replace Map: No spares have replaced any drives
Big Spare Marked OK Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

Logical Drive 3:
Drive Status: OK
Blocks to Rebuild: 0
Blocks Re-mapped:
Spare Status Flags: 0x21
At least 1 physical drive is configured as an on-line spare
An on-line spare drive is available for activation
Spare to Replaced Map: See Big Spare to Replace Map:
Media Was Exchanged: No
Cache Failure: No
Expand Failure: 0x00
Unit Flags: 0x00
Big Remap Count: All Counts Zero
Big Drive Failure Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Replacement Drive Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Active Spare Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare to Replace Map: No spares have replaced any drives
Big Spare Marked OK Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

Logical Drive 4:
Drive Status: OK
Blocks to Rebuild: 0
Blocks Re-mapped:
Spare Status Flags: 0x21
At least 1 physical drive is configured as an on-line spare
An on-line spare drive is available for activation
Spare to Replaced Map: See Big Spare to Replace Map:
Media Was Exchanged: No
Cache Failure: No
Expand Failure: 0x00
Unit Flags: 0x00
Big Remap Count: All Counts Zero
Big Drive Failure Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Replacement Drive Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Active Spare Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare to Replace Map: No spares have replaced any drives
Big Spare Marked OK Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

Logical Drive 5:
Drive Status: OK
Blocks to Rebuild: 0
Blocks Re-mapped:
Spare Status Flags: 0x21
At least 1 physical drive is configured as an on-line spare
An on-line spare drive is available for activation
Spare to Replaced Map: See Big Spare to Replace Map:
Media Was Exchanged: No
Cache Failure: No
Expand Failure: 0x00
Unit Flags: 0x00
Big Remap Count: All Counts Zero
Big Drive Failure Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Replacement Drive Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Active Spare Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare to Replace Map: No spares have replaced any drives
Big Spare Marked OK Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

Logical Drive 6:
Drive Status: OK
Blocks to Rebuild: 0
Blocks Re-mapped:
Spare Status Flags: 0x21
At least 1 physical drive is configured as an on-line spare
An on-line spare drive is available for activation
Spare to Replaced Map: See Big Spare to Replace Map:
Media Was Exchanged: No
Cache Failure: No
Expand Failure: 0x00
Unit Flags: 0x00
Big Remap Count: All Counts Zero
Big Drive Failure Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Replacement Drive Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Active Spare Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Spare to Replace Map: No spares have replaced any drives
Big Spare Marked OK Map: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

MONITOR AND PERFORMANCE DATA:

SCSI Port 1, Drive ID 0
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 59 48 50 30 30 30 30 38 36 34 34 3LM01YHP00008644
46 43 42 50 48 50 42 34 00 00 00 00 43 4f 4d 50 FCBPHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 59 48 50 30 30 30 30 38 36 34 34 3LM01YHP00008644
46 43 42 50 48 50 42 34 00 00 00 00 43 4f 4d 50 FCBPHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006f274c9bb 000000000041f5f6 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d2aa9084 0000000000000277 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x0a
Total Errors Logged = 0x0000000a
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000166f1 28 0000
02 04 06 29 02 00000000(0) 0001fce7 2a 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
00 0e 00 00 00 02c2faa0(0) 0003b442 28 0000
02 04 06 29 02 00000000(0) 0003b443 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000

SCSI Port 1, Drive ID 1
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4a 44 52 30 30 30 30 38 36 34 32 3LM01JDR00008642
45 48 36 4c 48 50 42 34 00 00 00 00 43 4f 4d 50 EH6LHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4a 44 52 30 30 30 30 38 36 34 32 3LM01JDR00008642
45 48 36 4c 48 50 42 34 00 00 00 00 43 4f 4d 50 EH6LHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006eeda458c 000000000041f4d5 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d2b99c56 0000000000000282 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x08
Total Errors Logged = 0x00000008
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000166f1 28 0000
02 04 06 29 02 00000000(0) 0001fce7 2a 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000

SCSI Port 1, Drive ID 2
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 36 48 30 30 30 30 38 36 34 32 3LM01P6H00008642
45 48 39 52 48 50 42 34 00 00 00 00 43 4f 4d 50 EH9RHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 36 48 30 30 30 30 38 36 34 32 3LM01P6H00008642
45 48 39 52 48 50 42 34 00 00 00 00 43 4f 4d 50 EH9RHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006ebe28de7 000000000041f501 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d359c113 000000000000027b 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x09
Total Errors Logged = 0x00000009
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000166f1 28 0000
02 04 06 29 02 00000000(0) 0001fce7 2a 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
08 04 00 00 00 00000000(0) 0003b441 1a 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000

SCSI Port 1, Drive ID 3
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4d 38 4a 30 30 30 30 38 36 34 32 3LM01M8J00008642
45 46 54 5a 48 50 42 34 00 00 00 00 43 4f 4d 50 EFTZHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4d 38 4a 30 30 30 30 38 36 34 32 3LM01M8J00008642
45 46 54 5a 48 50 42 34 00 00 00 00 43 4f 4d 50 EFTZHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006eb00c14c 000000000041f516 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000015 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d5ef3fab 0000000000000242 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x09
Total Errors Logged = 0x0000001d
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 18 07 13f1ef7c(0) 0002b3b1 28 0000
02 04 01 18 02 13e22ff5(0) 0002b3b7 28 0000
02 04 01 18 02 13e2294d(0) 0002b3b7 28 0000
02 04 01 18 02 188bd254(0) 0002b739 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
02 04 01 18 01 0c9260ef(0) 0002a912 28 0000
02 04 01 18 02 1723c431(0) 0002ae42 28 0000
02 04 01 18 02 17054c10(0) 0002ae5b 28 0000
02 04 01 18 02 1450934b(0) 0002b38c 28 0000
02 04 01 18 02 1431121a(0) 0002b399 28 0000
02 04 01 18 07 14310bab(0) 0002b399 28 0000
02 04 01 18 07 1431050c(0) 0002b399 28 0000
02 04 01 18 02 1411693e(0) 0002b3a5 28 0000
02 04 01 18 07 1401bc4d(0) 0002b3ab 28 0000
02 04 01 18 07 1401b5a8(0) 0002b3ab 28 0000
02 04 01 18 07 13f1f61e(0) 0002b3b1 28 0000

SCSI Port 1, Drive ID 4
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 54 37 30 30 30 30 30 30 30 30 3LM01PT700000000
30 30 30 30 48 50 42 34 00 00 00 00 43 4f 4d 50 0000HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 54 37 30 30 30 30 30 30 30 30 3LM01PT700000000
30 30 30 30 48 50 42 34 00 00 00 00 43 4f 4d 50 0000HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006e40c9604 000000000041f54b 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d57e9ebe 000000000000024b 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000001 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x0a
Total Errors Logged = 0x0000000a
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
00 0e 00 00 00 2156b5cf(0) 000166f1 2a 0000
02 04 06 29 02 00000000(0) 000166f1 2a 0000
02 04 06 29 02 00000000(0) 0001fce7 2a 0000
02 04 01 03 00 09f9a076(0) 00028b1a 2a 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000

SCSI Port 1, Drive ID 5
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 51 54 58 30 30 30 30 38 36 34 32 3LM01QTX00008642
45 46 4c 55 48 50 42 34 00 00 00 00 43 4f 4d 50 EFLUHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 51 54 58 30 30 30 30 38 36 34 32 3LM01QTX00008642
45 46 4c 55 48 50 42 34 00 00 00 00 43 4f 4d 50 EFLUHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006e21b4dd4 000000000041f59d 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d2fc8e8a 0000000000000259 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0001 0000 ffff 0182
Rebuilds 0006 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x0b
Total Errors Logged = 0x0000000b
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
00 0e 00 00 00 00000040(0) 000166f1 2a 0000
02 04 06 29 02 00000000(0) 000166f1 2a 0000
02 04 06 29 02 00000000(0) 0001fce7 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
00 0e 00 00 00 02c5c2c0(0) 0003b443 28 0000
02 04 06 29 02 00000000(0) 0003b443 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000

SCSI Port 1, Target ID 3, Drive ID 6
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 3, Drive ID 7
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Drive ID 8
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 4c 31 30 30 30 30 38 36 34 33 3LM01PL100008643
45 53 4b 53 48 50 42 34 00 00 00 00 43 4f 4d 50 ESKSHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 4c 31 30 30 30 30 38 36 34 33 3LM01PL100008643
45 53 4b 53 48 50 42 34 00 00 00 00 43 4f 4d 50 ESKSHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006dd676918 000000000041f5b1 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d2f1f875 000000000000024c 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0001 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x0a
Total Errors Logged = 0x0000000a
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000166f1 28 0000
00 0e 00 00 00 00000040(0) 0001fce6 2a 0000
02 04 06 29 02 00000000(0) 0001fce7 2a 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
08 04 00 00 00 00000000(0) 0003b444 1a 0000

SCSI Port 1, Drive ID 9
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 32 30 37 36 30 30 30 30 38 36 34 34 3LM0207600008644
46 43 42 32 48 50 42 34 00 00 00 00 43 4f 4d 50 FCB2HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 32 30 37 36 30 30 30 30 38 36 34 34 3LM0207600008644
46 43 42 32 48 50 42 34 00 00 00 00 43 4f 4d 50 FCB2HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006dc91772e 000000000041f628 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d292981e 0000000000000271 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x08
Total Errors Logged = 0x00000008
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000166f1 28 0000
02 04 06 29 02 00000000(0) 0001fce7 2a 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b442 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000
00 0e 00 00 00 02c993a0(0) 0003b444 28 0000
02 04 06 29 02 00000000(0) 0003b444 28 0000

SCSI Port 1, Target ID 3, Drive ID 10
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 3, Drive ID 11
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 3, Drive ID 12
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 3, Drive ID 13
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 3, Drive ID 14
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 3, Drive ID 15
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 0
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 1
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 2
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 3
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 4
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 5
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 6
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 7
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 8
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 9
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 10
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 11
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 12
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 13
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 14
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 1, Target ID 4, Drive ID 15
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Drive ID 0
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 51 4a 41 30 30 30 30 38 36 34 32 3LM01QJA00008642
45 46 46 43 48 50 42 34 00 00 00 00 43 4f 4d 50 EFFCHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 51 4a 41 30 30 30 30 38 36 34 32 3LM01QJA00008642
45 46 46 43 48 50 42 34 00 00 00 00 43 4f 4d 50 EFFCHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006dd745270 000000000041f655 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d2d84362 0000000000000262 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x04
Total Errors Logged = 0x00000004
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000294a7 28 0000
00 0e 00 00 00 02be37e0(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000

SCSI Port 2, Drive ID 1
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 57 37 30 30 30 30 38 36 34 30 3LM01PW700008640
44 31 5a 4d 48 50 42 34 00 00 00 00 43 4f 4d 50 D1ZMHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 57 37 30 30 30 30 38 36 34 30 3LM01PW700008640
44 31 5a 4d 48 50 42 34 00 00 00 00 43 4f 4d 50 D1ZMHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006dd337021 000000000041f69a 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d2f66b3c 0000000000000268 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x04
Total Errors Logged = 0x00000004
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000294a7 28 0000
00 0e 00 00 00 02be37e0(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000

SCSI Port 2, Drive ID 2
Factory: Serial #, Firmware Rev, and Mfg/Model #:
44 41 30 31 50 36 36 30 34 39 45 56 30 36 32 36 DA01P66049EV0626
00 00 00 00 48 50 42 31 00 00 00 00 43 4f 4d 50 ....HPB1....COMP
41 51 20 20 42 44 33 30 30 38 39 42 42 41 20 20 AQ BD30089BBA
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
44 41 30 31 50 36 36 30 34 39 45 56 30 36 32 36 DA01P66049EV0626
00 00 00 00 48 50 42 31 00 00 00 00 43 4f 4d 50 ....HPB1....COMP
41 51 20 20 42 44 33 30 30 38 39 42 42 41 20 20 AQ BD30089BBA
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 00033d5b 0000000d ffffffff 8184
Read Blks 0000000487918a9f 000000000041f699 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000c13a16cb 0000000000000277 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000001 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0005 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000001 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x03
Total Errors Logged = 0x00000003
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
00 22 00 00 00 00000500(0) 00018885 12 0000
00 0e 00 00 00 02be37e0(0) 00031d36 28 0000
02 04 06 29 02 00000000(0) 00031d36 28 0000

SCSI Port 2, Drive ID 3
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4a 41 54 30 30 30 30 38 36 34 32 3LM01JAT00008642
45 48 55 41 48 50 42 34 00 00 00 00 43 4f 4d 50 EHUAHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4a 41 54 30 30 30 30 38 36 34 32 3LM01JAT00008642
45 48 55 41 48 50 42 34 00 00 00 00 43 4f 4d 50 EHUAHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006ea535686 000000000041f69c 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d4e8b30c 000000000000024a 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x03
Total Errors Logged = 0x00000003
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
00 0e 00 00 00 02be37e0(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000

SCSI Port 2, Drive ID 4
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4d 4e 48 30 30 30 30 30 30 30 30 3LM01MNH00000000
30 30 30 30 48 50 42 34 00 00 00 00 43 4f 4d 50 0000HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 4d 4e 48 30 30 30 30 30 30 30 30 3LM01MNH00000000
30 30 30 30 48 50 42 34 00 00 00 00 43 4f 4d 50 0000HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006eecec499 000000000041f6fc 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d531ad07 0000000000000269 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0001 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x04
Total Errors Logged = 0x00000004
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
00 0e 00 00 00 00000040(0) 000294a7 2a 0000
02 04 06 29 02 00000000(0) 000294a7 2a 0000
00 0e 00 00 00 02be37e0(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000

SCSI Port 2, Drive ID 5
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 48 57 30 30 30 30 38 36 34 33 3LM01PHW00008643
45 53 4a 46 48 50 42 34 00 00 00 00 43 4f 4d 50 ESJFHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 48 57 30 30 30 30 38 36 34 33 3LM01PHW00008643
45 53 4a 46 48 50 42 34 00 00 00 00 43 4f 4d 50 ESJFHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006f13e0858 000000000041f720 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d38109dc 000000000000028d 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x04
Total Errors Logged = 0x00000004
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000294a7 28 0000
00 0e 00 00 00 02be37e0(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000

SCSI Port 2, Target ID 3, Drive ID 6
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 3, Drive ID 7
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Drive ID 8
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 41 52 30 30 30 30 38 36 34 30 3LM01PAR00008640
43 56 34 47 48 50 42 34 00 00 00 00 43 4f 4d 50 CV4GHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 50 41 52 30 30 30 30 38 36 34 30 3LM01PAR00008640
43 56 34 47 48 50 42 34 00 00 00 00 43 4f 4d 50 CV4GHPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 00000006f5ad61d9 000000000041f756 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 00000000d3726c43 000000000000028f 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0000 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x04
Total Errors Logged = 0x00000004
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000
02 04 06 29 02 00000000(0) 000294a7 28 0000
00 0e 00 00 00 02be37e0(0) 0003b441 28 0000
02 04 06 29 02 00000000(0) 0003b441 28 0000

SCSI Port 2, Drive ID 9
Factory: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 52 57 48 30 30 30 30 38 36 34 31 3LM01RWH00008641
44 46 47 33 48 50 42 34 00 00 00 00 43 4f 4d 50 DFG3HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Since Power: Serial #, Firmware Rev, and Mfg/Model #:
33 4c 4d 30 31 52 57 48 30 30 30 30 38 36 34 31 3LM01RWH00008641
44 46 47 33 48 50 42 34 00 00 00 00 43 4f 4d 50 DFG3HPB4....COMP
41 51 20 20 42 46 33 30 30 38 42 32 36 43 20 20 AQ BF3008B26C
20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 ............
00 00 00 00 ....
Threshold Flags: 0x0001
Serial Number Control: 0x8054
Firmware Revision Control: 0x8248
Mfg/Model Number Control: 0x8268

Factory Since Power Threshold Control
Serv. Time 0003d466 0000000d ffffffff 8184
Read Blks 0000000185a82cf7 00000000000001da 8108
Hrd Read 00000000 00000000 ffffffff 8184
Rtry Read 00000000 00000000 ffffffff 8184
ECC Read 0000000000000000 0000000000000000 ffffffffffffffff 8188
Write Blks 000000001e7fee8e 0000000000000279 8108
Hrd Write 00000000 00000000 ffffffff 8184
Rtry Write 00000000 00000000 ffffffff 8184
Seeks 0000000000000000 0000000000000000 8108
Seek Errs 0000000000000000 0000000000000000 ffffffffffffffff 8188
Spin Cyls 00000000 00000000 ffffffff 8184
Spin Time ffff ffff ffff 8a82
Test 1 ffff ffff ffff 0a82
Test 2 ffff ffff ffff 8a82
Test 3 ffff ffff ffff 8a82
Test 4 ffff ffff ffff 8a82
Spare Blks ffffffff ffffffff 0a04
Re-mapped ffffffff ffffffff ffffffff 8d84
DRQ Tmots ffff ffff ffff 0982
Timeouts 0000 0000 ffff 0182
Rebuilds 0005 0000 ffff 0182
Spn Retrs ffff ffff ffff 0982
Fl Rd Recv 0000 0000 ffff 8182
Fl Wt Recv 0000 0000 ffff 0182
Format Err 0000 0000 ffff 0182
POST Err ffff ffff ffff 0982
Drv Nt Ry 00000000 00000000 ffffffff 0184
Reallc Abt ffffffff ffffffff ffffffff 0984
IRQ Gltchs ffffffff ffffffff ffffffff 0984
Bus Flts 00000000 00000000 ffffffff 8184
Hot Plgs 00000000 00000000 ffffffff 0184
Tk Rwt Err ffff ffff ffff 0982
Rmp Wt Err ffff ffff ffff 0982
Bg Fw Rev 0000000000000000 0000000000000000 0a48
Med Flrs 0000 0000 ffff 0182
Hrdw Errs 0000 0000 ffff 0182
Abt Cmd Fl 0000 0000 ffff 0182
Spn Up Fl 0000 0000 ffff 0182
Bd Tgt Cnt 0000 0000 ffff 0182
Pred Fails 00000000 00000000 00000000 2184

DRIVE ERROR LOG:
Error Log Header:
Parameter Length = 0x14
Entry Size = 0x0014
Current Entry = 0x01
Total Errors Logged = 0x00000001
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
02 04 01 1f 00 00000000(0) 00000000 37 0000

SCSI Port 2, Target ID 3, Drive ID 10
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 3, Drive ID 11
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 3, Drive ID 12
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 3, Drive ID 13
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 3, Drive ID 14
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 3, Drive ID 15
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 0
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 1
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 2
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 3
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 4
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 5
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 6
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 7
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 8
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 9
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 10
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 11
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 12
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 13
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 14
Not Available

DRIVE ERROR LOG:
Not Available

SCSI Port 2, Target ID 4, Drive ID 15
Not Available

DRIVE ERROR LOG:
Not Available

SURFACE ANALYSIS STATUS:

Time remaining to start: 0 secs.
Surface analysis delay: 3 secs.

SCSI Port 1:
Big
Drive ID Current Block
-------- -------------
00 0x00545d40
01 0x00545d40
02 0x00545d40
03 0x00545d40
04 0x00545d40
05 0x00545d40
06 0x00000000
07 0x00000000
08 0x00545d40
09 0x00545d40
10 0x00000000
11 0x00000000
12 0x00000000
13 0x00000000
14 0x00000000
15 0x00000000

SCSI Port 1:
Big
Drive ID Current Block
-------- -------------
00 0x00000000
01 0x00000000
02 0x00000000
03 0x00000000
04 0x00000000
05 0x00000000
06 0x00000000
07 0x00000000
08 0x00000000
09 0x00000000
10 0x00000000
11 0x00000000
12 0x00000000
13 0x00000000
14 0x00000000
15 0x00000000

SCSI Port 2:
Big
Drive ID Current Block
-------- -------------
00 0x00545d40
01 0x00545d40
02 0x00545d40
03 0x00545d40
04 0x00545d40
05 0x00545d40
06 0x00000000
07 0x00000000
08 0x00545d40
09 0x00000000
10 0x00000000
11 0x00000000
12 0x00000000
13 0x00000000
14 0x00000000
15 0x00000000

SCSI Port 2:
Big
Drive ID Current Block
-------- -------------
00 0x00000000
01 0x00000000
02 0x00000000
03 0x00000000
04 0x00000000
05 0x00000000
06 0x00000000
07 0x00000000
08 0x00000000
09 0x00000000
10 0x00000000
11 0x00000000
12 0x00000000
13 0x00000000
14 0x00000000
15 0x00000000

Big Surface Surface
Logical Big Inconsistent Blocks Controller Analysis Analysis
Drive Status Block Reassigned Resets Passes Pass Time
------- ------ ------------ ---------- ---------- ---------- ----------
1 0x01 0x00000000 0 0 5 59
2 0x01 0x00000000 0 0 2 10249
3 0x01 0x00000000 0 0 1 27103
4 0x01 0x00000000 0 0 1 17878
5 0x01 0x00000000 0 0 1 33359
6 0x01 0x00000000 0 0 1 12173
7 0x00 0x00000000 0 0 0 0
8 0x00 0x00000000 0 0 0 0
9 0x00 0x00000000 0 0 0 0
10 0x00 0x00000000 0 0 0 0
11 0x00 0x00000000 0 0 0 0
12 0x00 0x00000000 0 0 0 0
13 0x00 0x00000000 0 0 0 0
14 0x00 0x00000000 0 0 0 0
15 0x00 0x00000000 0 0 0 0
16 0x00 0x00000000 0 0 0 0
17 0x00 0x00000000 0 0 0 0
18 0x00 0x00000000 0 0 0 0
19 0x00 0x00000000 0 0 0 0
20 0x00 0x00000000 0 0 0 0
21 0x00 0x00000000 0 0 0 0
22 0x00 0x00000000 0 0 0 0
23 0x00 0x00000000 0 0 0 0
24 0x00 0x00000000 0 0 0 0
25 0x00 0x00000000 0 0 0 0
26 0x00 0x00000000 0 0 0 0
27 0x00 0x00000000 0 0 0 0
28 0x00 0x00000000 0 0 0 0
29 0x00 0x00000000 0 0 0 0
30 0x00 0x00000000 0 0 0 0
31 0x00 0x00000000 0 0 0 0
32 0x00 0x00000000 0 0 0 0

ACCELERATOR STATUS:
Logical Drive Disable Map: 0xffffffc0
Read Cache Size: 128 MBytes
Posted Write Size: 128 MBytes
Disable Flag: 0x00
Status: 0x00000001
Disable Code: 0x0000
Total Memory Size: 256 MBytes
Battery Count: 1
Battery Status: 0x0001
Parity Read Errors: 0000
Parity Write Errors: 0000
Error Log: N/A
Failed Batteries: 0x0000
Board Present: Yes
Accelerator Failure Map: 0x00000000
Max Error Log Entries: 32
NVRAM Load Status: 0x10
Memory Size Shift Factor: 0x0a
Non Battery Backed Memory: 0 MBytes
Memory State: 0x00

PHYSICAL DRIVE IDENTIFICATION:

SCSI Port 1, Drive ID 0

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01YHP00008644FCBP
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 1 (number of the physical drive bay in the enclosure)
SCSI Port 1, Drive ID 1

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01JDR00008642EH6L
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 2 (number of the physical drive bay in the enclosure)
SCSI Port 1, Drive ID 2

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01P6H00008642EH9R
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 3 (number of the physical drive bay in the enclosure)
SCSI Port 1, Drive ID 3

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01M8J00008642EFTZ
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 4 (number of the physical drive bay in the enclosure)
SCSI Port 1, Drive ID 4

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01PT7000000000000
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 5 (number of the physical drive bay in the enclosure)
SCSI Port 1, Drive ID 5

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01QTX00008642EFLU
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x0E (Aborted command)
Phys Drive Flags: 0xe9 0x25 0x04 0x00
Drive present and operational
Narrow SCSI transfers Enabled
Wide Transfer Failed; Check Cables
Ultra2 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 6 (number of the physical drive bay in the enclosure)
SCSI Port 1, Target ID 3, Drive ID 6 ---> Not available
SCSI Port 1, Target ID 3, Drive ID 7 ---> Not available
SCSI Port 1, Drive ID 8

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01PL100008643ESKS
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 7 (number of the physical drive bay in the enclosure)
SCSI Port 1, Drive ID 9

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM0207600008644FCB2
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I1 (controller connector attached to drive)
Physical Box on Bus: 1 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 8 (number of the physical drive bay in the enclosure)
SCSI Port 1, Target ID 3, Drive ID 10 ---> Not available
SCSI Port 1, Target ID 3, Drive ID 11 ---> Not available
SCSI Port 1, Target ID 3, Drive ID 12 ---> Not available
SCSI Port 1, Target ID 3, Drive ID 13 ---> Not available
SCSI Port 1, Target ID 3, Drive ID 14 ---> Not available
SCSI Port 1, Target ID 3, Drive ID 15 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 0 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 1 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 2 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 3 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 4 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 5 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 6 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 7 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 8 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 9 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 10 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 11 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 12 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 13 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 14 ---> Not available
SCSI Port 1, Target ID 4, Drive ID 15 ---> Not available
SCSI Port 2, Drive ID 0

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01QJA00008642EFFC
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 1 (number of the physical drive bay in the enclosure)
SCSI Port 2, Drive ID 1

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01PW700008640D1ZM
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 2 (number of the physical drive bay in the enclosure)
SCSI Port 2, Drive ID 2

Drive Model: COMPAQ BD30089BBA
Product Rev: HPB1
Serial Number: DA01P66049EV0626
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x3A
Stamped for M&P: yes
Last Failure Reason: 0x0C (Drive not ready)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 3 (number of the physical drive bay in the enclosure)
SCSI Port 2, Drive ID 3

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01JAT00008642EHUA
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 4 (number of the physical drive bay in the enclosure)
SCSI Port 2, Drive ID 4

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01MNH000000000000
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 5 (number of the physical drive bay in the enclosure)
SCSI Port 2, Drive ID 5

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01PHW00008643ESJF
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 6 (number of the physical drive bay in the enclosure)
SCSI Port 2, Target ID 3, Drive ID 6 ---> Not available
SCSI Port 2, Target ID 3, Drive ID 7 ---> Not available
SCSI Port 2, Drive ID 8

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01PAR00008640CV4G
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x25 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 7 (number of the physical drive bay in the enclosure)
SCSI Port 2, Drive ID 9

Drive Model: COMPAQ BF3008B26C
Product Rev: HPB4
Serial Number: 3LM01RWH00008641DFG3
Drive Type: 0x00 Parallel SCSI
Block Size: 512 bytes/sector
Total Blocks: 585937500 sectors/disk
Reserved Blocks: 1088 reserved sectors/disk
SCSI Inquiry Bits: 0x32
Stamped for M&P: yes
Last Failure Reason: 0x00 (Drive has not failed)
Phys Drive Flags: 0xcd 0x65 0x05 0x00
Drive present and operational
Wide SCSI transfers Enabled
Ultra3 SCSI Enabled
S.M.A.R.T. Supported
S.M.A.R.T. Enabled
Configured as part of Logical Drive
Configured as Spare
SCSI LUN: 0
Spi Speed Rules: 0x00000000
Physical Connector: I2 (controller connector attached to drive)
Physical Box on Bus: 2 (number of the physical enclosure in which drive resides)

Physical Bay in Box: 8 (number of the physical drive bay in the enclosure)
SCSI Port 2, Target ID 3, Drive ID 10 ---> Not available
SCSI Port 2, Target ID 3, Drive ID 11 ---> Not available
SCSI Port 2, Target ID 3, Drive ID 12 ---> Not available
SCSI Port 2, Target ID 3, Drive ID 13 ---> Not available
SCSI Port 2, Target ID 3, Drive ID 14 ---> Not available
SCSI Port 2, Target ID 3, Drive ID 15 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 0 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 1 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 2 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 3 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 4 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 5 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 6 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 7 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 8 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 9 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 10 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 11 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 12 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 13 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 14 ---> Not available
SCSI Port 2, Target ID 4, Drive ID 15 ---> Not available

CONTROLLER PARAMETERS:

LED Control: 0x00
Command List Verification: On
Backed-out Write drives: 0
Stripes for Parity: 0
Distribution Mode: 0x00
Maximum Driver Requests: 0x0000
Elevator Trend Count: 0x0000
Disable Elevator: 0x00
Force Scan Complete: 0x00
Synch/Asynch Mode: Auto Detect
Force Narrow: No
Rebuild Priority: 0
Expand Priority: 0
SDB ASIC Fix: 0x00
PDIP Burst Disable: 0x00
Software Name:
Hardware Name:

SCSI BUS 1 PARAMETERS:
Inquiry Data Valid: Yes
Inquiry Header: 03 00 02 02 21 00 00 00
Vendor Id: COMPAQ
Product Id: PROLIANT 4LEE
Product Rev: CP20
Hot Plug Counts:
All counts are zero
Fan Alert Count: 0x0000
Alarm Status: 0x00 (No Alarms)
Temperature Status: 0x00
Valid Alarm Bits: 0x0b
Alarm Count: 0000
Specific Counts: 00000 00000 00000 00000 00000 00000 00000 00000
Connection Info: 0x0102
SCSI Device Rev: 0x01
Fan Status: 0x0000
More Inquiry Data:
03 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 . ..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
SCSI Device Type: 0x00cf9005 (AIC-7899)
Interrupt Count: 00000000
Ultra Bus Faults: 0x00000000
SCSI Initiator ID: 6
SCSI Target ID: 6
Chassis Serial Number: MQY6LMPX77
Physical Connector: I1 (controller connector attached to drive)
Big Inst Drive Map: 0x033f 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
Big Bus Map: 0xffff 0xffff 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
More Connection Info: 0x05 (LVD SCSI bus enabled)

SCSI BUS 2 PARAMETERS:
Inquiry Data Valid: Yes
Inquiry Header: 03 00 02 02 21 00 00 00
Vendor Id: COMPAQ
Product Id: PROLIANT 4LEE
Product Rev: CP20
Hot Plug Counts:
All counts are zero
Fan Alert Count: 0x0000
Alarm Status: 0x00 (No Alarms)
Temperature Status: 0x00
Valid Alarm Bits: 0x0b
Alarm Count: 0000
Specific Counts: 00000 00000 00000 00000 00000 00000 00000 00000
Connection Info: 0x0102
SCSI Device Rev: 0x01
Fan Status: 0x0000
More Inquiry Data:
03 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 . ..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
SCSI Device Type: 0x00cf9005 (AIC-7899)
Interrupt Count: 00000000
Ultra Bus Faults: 0x00000000
SCSI Initiator ID: 6
SCSI Target ID: 6
Chassis Serial Number: MQYVLMPX77
Physical Connector: I2 (controller connector attached to drive)
Big Inst Drive Map: 0x0000 0x0000 0x033f 0x0000 0x0000 0x0000 0x0000 0x0000
Big Bus Map: 0x0000 0x0000 0xffff 0xffff 0x0000 0x0000 0x0000 0x0000
More Connection Info: 0x05 (LVD SCSI bus enabled)

PARTITION TABLES:

None found.

RIS DATA AREA:

SCSI Port 1, Drive ID 0:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Drive ID 1:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Drive ID 2:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Drive ID 3:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Drive ID 4:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Drive ID 5:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Target ID 3, Drive ID 6: Physical drive not connected.
SCSI Port 1, Target ID 3, Drive ID 7: Physical drive not connected.
SCSI Port 1, Drive ID 8:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Drive ID 9:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 1, Target ID 3, Drive ID 10: Physical drive not connected.
SCSI Port 1, Target ID 3, Drive ID 11: Physical drive not connected.
SCSI Port 1, Target ID 3, Drive ID 12: Physical drive not connected.
SCSI Port 1, Target ID 3, Drive ID 13: Physical drive not connected.
SCSI Port 1, Target ID 3, Drive ID 14: Physical drive not connected.
SCSI Port 1, Target ID 3, Drive ID 15: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 0: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 1: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 2: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 3: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 4: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 5: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 6: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 7: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 8: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 9: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 10: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 11: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 12: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 13: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 14: Physical drive not connected.
SCSI Port 1, Target ID 4, Drive ID 15: Physical drive not connected.
SCSI Port 2, Drive ID 0:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Drive ID 1:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Drive ID 2:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Drive ID 3:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Drive ID 4:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Drive ID 5:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Target ID 3, Drive ID 6: Physical drive not connected.
SCSI Port 2, Target ID 3, Drive ID 7: Physical drive not connected.
SCSI Port 2, Drive ID 8:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Drive ID 9:
RIS Copy 0: Not Available
RIS Copy 1: Not Available
SCSI Port 2, Target ID 3, Drive ID 10: Physical drive not connected.
SCSI Port 2, Target ID 3, Drive ID 11: Physical drive not connected.
SCSI Port 2, Target ID 3, Drive ID 12: Physical drive not connected.
SCSI Port 2, Target ID 3, Drive ID 13: Physical drive not connected.
SCSI Port 2, Target ID 3, Drive ID 14: Physical drive not connected.
SCSI Port 2, Target ID 3, Drive ID 15: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 0: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 1: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 2: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 3: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 4: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 5: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 6: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 7: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 8: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 9: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 10: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 11: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 12: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 13: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 14: Physical drive not connected.
SCSI Port 2, Target ID 4, Drive ID 15: Physical drive not connected.

Please any help in resolving this will be appreciated.