Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Change the disk failure protection in EVA3000

Ernesto, Arias
Occasional Contributor

Change the disk failure protection in EVA3000

Hi:
Whe have an EVA3000 which disk failure protection is setting double.How can I change the level protection from double to single? It is possible change it online?
I will appreciate for your help.
Regards.
Ernesto
Arias
2 REPLIES
Basil Vizgin
Honored Contributor

Re: Change the disk failure protection in EVA3000

Yes, you can.
In CommandView choose desired DiskGroup properties and change Disk failure protection setting.
Ivan Ferreira
Honored Contributor

Re: Change the disk failure protection in EVA3000

Yes, you can do it online and you won't have any troubles.

Go to the CV, then Select your Storage, Disk Groups, , Disk Failure Protection, and change it to single.

(This post is only for support the previous post as no additional info provided. Normally, is good for the Author so can have a "quorum")
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?