Disk Enclosures

Clustered iSCSI servers for D8000

 
Jeremy C
Regular Advisor

Clustered iSCSI servers for D8000

Two DL360 Gen10 servers (Windows 2019), each cabled to an HPE D8000 disk enclosure via SAS cables.  Both of the servers can see the drives on the D8000.  I want to provision the logical volumes with HPE Smart Storage Administrator and the cluster to recognize those logical volumes as clustered.  When I run cluster validation on the storage I get:
The hardware is not compatible with Storage Spaces Direct (S2D).
Contact the hardware vendor to verify support for Device Identification VPD page 83h SCSI inquiry data.

I do not want to add all the disks from the D8000 as a cluster storage pool because letting windows provision the raid arrays results in terrible performance.

Thanks

2 REPLIES 2
support_s
System Recommended

Query: Clustered iSCSI servers for D8000

System recommended content:

1. HPE D8000 Disk Enclosure

2. HPE D8000 Disk Enclosure Installation and Maintenance Guide

 

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

 

Thank you for being a HPE community member.


Accept or Kudo

SanjeevGoyal
HPE Pro

Re: Clustered iSCSI servers for D8000

Hello,
 
Please follow the below documents
D8000 Best Practices
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00069743en_us

D8000 Disk Enclosure Installation and Maintenance Guide
https://support.hpe.com/hpesc/public/docDisplay?docId=a00067471en_us&docLocale=en_US


If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,


I am a HPE Employee

Accept or Kudo