Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Command View EVA - wrong date+time

SOLVED
Go to solution
BrianDoyle
Trusted Contributor

Command View EVA - wrong date+time

Hello,

On our EVA4000, the Date/Time for each vdisk created is incorrect by about 2 weeks.
Any idea how I can change the date/time for Command View ?Where does it get this value?

Rgds,
Brian
3 REPLIES
Uwe Zessin
Honored Contributor
Solution

Re: Command View EVA - wrong date+time

I doubt that you can change this afterwards if that was a question.

You can set up automatic time synchronization from the management server to the HSV controllers. On CV-EVA V5:
- select the storage system to display its properties
- hit the [System options] tab
- then the [Set time options] button
- select [/] Re-sync controller time with the SAN management time
- hit [Save changes]
.
gurdeep_2
Frequent Advisor

Re: Command View EVA - wrong date+time

You should also checkmark "Re-sync controller time with the SAN management time" option under System Options, Set System Time.
This way, it resynchs at multiple times throughout the day.
You cannot change the date created timestamp on a virtual disk, that is hardcoded when the disk is created.
BrianDoyle
Trusted Contributor

Re: Command View EVA - wrong date+time

Thanks for your help guys.