Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Command View no longer works

SOLVED
Go to solution
Gregory Locke
Frequent Advisor

Command View no longer works

Hi All:

i have an rp4440 that used to be names zeus. It is now named hercules. However, when I try to use Command View and access the system (correct current name and IP), and click on the va7410 array it shows zeus as the Host: and I get a Fatal Initialization Error saying "Init error for device:'zeus:00USR00002T2'
Init error:Initial Device Exception
Failed to open target zeus@null:Error logging in: TIMEOUT EXPIRED

Does anybody have an idea where to change that zeus reference to hercules?
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: Command View no longer works

Check

/opt/sanmgr/hostagent/config/access.dat
/opt/sanmgr/hostagent/config/commIpAddr.txt

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Gregory Locke
Frequent Advisor

Re: Command View no longer works

Between help from Torsten and fnding the CommandView manuals, I managed to fix the problem. Thanks to all.