Disk Enclosures
1748128 Members
3506 Online
108758 Solutions
New Discussion

CommandView EVA 6.0.2 do not see controllers

 
Felipe Martinez
Frequent Advisor

CommandView EVA 6.0.2 do not see controllers

I have and old EVA4000, Controlles Software is 6110 and CommandView is 6.0.2, i can create new Virtuals Disks, Host, present Disks to Hosts but, in Hardware when i try to expand to see controller, do not show controllers and if i try to shutdown it says "Operation failed!  No Controllers Found".

 

Any idea?

2 REPLIES 2
Johan Guldmyr
Honored Contributor

Re: CommandView EVA 6.0.2 do not see controllers

Could be an EMU/CAB issue. Check the back of the EVA - is the controllers on the right "number".

 

Tried a good old restart of CV? You can also restart the EVA controllers from the OCP.

Oscar_Maimó
Regular Advisor

Re: CommandView EVA 6.0.2 do not see controllers

I have the same problem, I restarted CV, controllers...

Any idea??