Disk Enclosures
1748180 Members
3952 Online
108759 Solutions
New Discussion юеВ

Re: CommandView EVA 9.3 Upgrade and HPSIM

 
SOLVED
Go to solution
Alzhy
Honored Contributor

CommandView EVA 9.3 Upgrade and HPSIM

We are planning to upgrade our lone COmmandView server managing 5 EVAs to 9.3. Firmware reqs have been made. Existing CV Server is being actively monitored by HP SIM and HP is autoalerted for any faults on the EVAs out of this COmmandView. After the Upgrade -- are there things that need to be updated HP-SIM wise?

Also, we're planning to add another server as a nother CommandView node to divvy up load and serve as backup instead first CV Node is out and broken. And we also want to have HP-SIM monitor the EVAs that are being actively managed from this environment..

My Questions:

- WIll HP SIM automatically detect and still erport whenever management of an EVA switches to this CV Server?
- Will it detect the failover or grab of management?

As an HP Person set up HP SIM monitoring... does anyone have a step by step HOWTO on what needs to be installed for thi CV Server to be managed/reported on by our HP SIM Server?

I take it: SMI-S provider is installed/updated along with the COmmandViwe install -- right? And all that's needed really is install HP-SIM Agent on this command view server and just discover the EVAs whilst the EVAs are activey managed from this CV Server?

TIA!

Hakuna Matata.
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: CommandView EVA 9.3 Upgrade and HPSIM

The

HP Insight Remote Support Advanced
A.05.50 Managed Systems Guide

should have all the steps you need to do.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Alzhy
Honored Contributor

Re: CommandView EVA 9.3 Upgrade and HPSIM

Torsty.... URL sir if you may?

Am also looking.

What about the failover of managing the EVAs.. will monitoring follow?

Thx.
Hakuna Matata.
Torsten.
Acclaimed Contributor

Re: CommandView EVA 9.3 Upgrade and HPSIM

googled (fasted way to find it):

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02474021/c02474021.pdf

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Bhavnish Kamboj (BK)
Trusted Contributor

Re: CommandView EVA 9.3 Upgrade and HPSIM

Hi Alzhy,

Don't forget to create a trust relationship in CV for SIM server. If you are upgrading not a fresh install then it should pick the old settings/relationships to new version. But in case not then make that.

Option is at Server Options -> SIM/RSM Trust Relationships -> Install Certificate


BK