Compatibility Securepath 3.0f, rp4440, EVA4000 active-active

[Javier Dominguez]

Hi,

I would like to know if securepath 3.0f is compatible with rp4440 server connected to a HP Sotrageworks EVA 4000 active-active. Release notes for Securepath 3.0f doesn't show this compatibility.

Thanks in advance.
Best regards,
Javier.

[Steven E. Protter]

Shalom,

This link may help:
http://www.attotech.com/pdfs/EBSMatrix-1206%5B1%5D.pdf

I'm thinking I've seen this combination before.

SEP

[Uwe Zessin]

Javier,
you need 3.0F SP1 at minimum. If you don't require dynamic load balancing, you can stick with plain PVlinks.

[Javier Dominguez]

Hi Steven/Uwe, thanks for your information but do you know if this combination is supported?

Thanks

[Javier Dominguez]

Hi Uwe,

sorry, I forgot to say that we will install Securepath 3.0f SP3

[IBaltay]

Hi,
maybe the
SAN design guide could help you:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00403562/c00403562.pdf

[Uwe Zessin · Accepted solution]

Yes, this configuration is supported, according to HP's compatibility list.

[Javier Dominguez]

Thanks. It's been resolved.