Configuring FC60 disk arrays

[Gerry Tully]

Does anyone have step by step instructions to configure two sc10's on an FC60 array? I can see the disks in ioscan but can't in SAM. Could be a senior moment. Thanks.

[Pete Randall · Accepted solution]

Gerry,

There's info in the User's Guide and the Advance User's Guide. You can find them here:

http://www.hp.com/cposupport/manindex/hpsurestor19163_eng_man.html

Pete

[Bill McNAMARA_1]

in /sbin/init.d/
there should be startup scripts to start the ARM daemons.

This allow management of the arrays from the ux box (via SCSI command pass thru)

Note, when running ioscans make sure you run it with the -k option as your system load will be hight otherwise. Only run ioscan without -k when you have added hw online. Two ioscans (without -k) can hang.

Later,
Bill