HPE Community
Disk Enclosures
1752809 Members
5684 Online
108789 Solutions
New Discussion

Configuring MSA30 MI

 
Eudo Jimenez_2
Frequent Advisor

‎01-18-2007 02:22 AM

‎01-18-2007 02:22 AM

Configuring MSA30 MI

Please...

We have a MSA30 MI connected to two rx4640 with 2 HP A9890A Smart Array 6400 Controller each one.

We like to use the four MSA30 MI ports (A1,A2,B1 and B2) two by server

How can I configure the MSA30 MI

I do the procedure on EFI Boot Process (entre F8 key) but it not display configuration Interfase.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎01-18-2007 03:44 AM

‎01-18-2007 03:44 AM

Re: Configuring MSA30 MI

Hi,

I think you cannot share the BUS with SA-controllers. So you need one half to one machine only.

Try to press ESC followed by 8 to get access to the orca (or use a USB keyboard and a screen ;-))

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.